1、Compatible Protocols: Communication protocols use standard for Modbus TCP protocol, for Modbus RTU over TCP protocol, MQTT protocol. 2、1 RS485 and 16 DIN: Adopt 1 RS485 communication interface, support standard for Modbus RTU protocol, for expansion, support 16 way din. 3、Easy to Operate: Ethernet remote IO module can be managed and configured via LAN connection configuration software, easy to operate and maintain. 4、LED Indication: Ethernet data acquisition module with LED to indicate the working status, with reset button for reset, easy to install and debug on site. 5、IP30 Protection: With metal housing, protection level IP30, metal housing and system safety isolation, especially suitable for industrial control site applications. 6、Wide Application: IO data module is designed to meet the needs of demanding industrial applications, can be used for industrial automation production, security monitoring systems, and automation control systems. Item Type: Ethernet Remote IO Module Material: Metal Interface: Ethernet Port x 1, RS485 x 1, DIN x 16 Power Output: DC x 1 Analog Quantity: 4-20mA Power Supply: Not Supported AO Output: 9-36VDC Support AO Output: 24-36VDC Power Consumption: Typical Standby Power Consumption: ≤ 2W Power Output: Channel Output Current: 1500mA at.12V (Maximum) Power Protection: Anti Reverse Connection, ESD Air: 15KV, Surge: 4KV Ethernet: Network Port Specification 1 x RJ45, 10M/100Mbps Network Interface Protection: ESD Contact: 8KV, Surge: 4KV (10/1000us) Protocol: for Modbus RTU, for Modbus TCP, MQTT Serial Port: Number Of Serial Ports: 1 x RS485 Serial Baud Rate: 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200, 128000 Data Bits: 7, 8 Check Bits: None, Eve, Odd Stop Bit: 0.5, 1, 1.5, 2 Protocol for Modbus RTU (Slave), for Modbus RTU (Master) Serial Port Protection: ESD Contact: 8KV Surge: 4KV (8/20us) Quantity: 16 Channels Wet Contact Supports Both NPN and PNP Sensors Dry Contact: Closing: Short Circuit Disconnection: Open End Wet Contact: Disconnection: 0-3VDC DIN2-DIN12 is supported as a low speed pulse counter: the anti jitter time can be set to 1-2000ms, the default is 1ms, and the maximum corresponding Pulse Frequency is 1KHz. Isolation Protection: 2KVrms Sampling Rate: 100Hz Typical Applications: Intelligent agricultural temperature and humidity data collection and monitoring; Intelligent temperature and humidity data collection and monitoring of aquaculture; Temperature and humidity data collection and monitoring in storage and library; Data collection and monitoring of meteorological station information; Temperature monitoring of cold storage, fruit and vegetable storage room, industrial machine room, transformer cabinet, etc; Other occasions where monitoring points are scattered; Data transmission of solar monitoring system, data acquisition and transmission of charging pile; Data transmission of ATM, POS, electricity meter, PLC, DAQ and other equipment; Smart grid data acquisition and control; Intelligent traffic data acquisition and control; Industrial automation data acquisition and control; Environmental protection data acquisition and control 1 x Module 1 x Guide Rail Clip 3 x Screw 1 x Instruction Card 1 x Power Adapter