Item Type: Robotic Servo Motor_x000D_ Material: Aluminum Alloy_x000D_ Maximum Torsion: 380kg.cm (24V) (Actual Measurement, Not Theoretically Calculated Value)_x000D_ 3648N.cm(24V) (Actual Measurement, Not Theoretically Calculated Value)_x000D_ 190kg.cm(12V) (Actual Measurement, Not Theoretical Calculation Value)_x000D_ 1824N.cm(12V) (Actual Measurement, Not Theoretically Calculated Value)_x000D_ Angular Speed: 0.5s/60(0.5s is Needed for 60Rotation), at 24V;_x000D_ 1.0s/60(1.0s is Required for 60Rotation), at 12V;_x000D_ Rotation Angle: 300Maxium_x000D_ Input Mode: Pulse Signal (Remote Control, Multi-Channel Steering Gear Controller, Single-Chip Microcomputer) or Analog Voltage Signal (Potentiometer)_x000D_ Pulse Signal Input Range: 0.5ms-2.5ms Suitable for All "Multi-Channel Steering Gear Controllers", "1ms-2ms Model Airplane Remote Control", "MCU Programming", Etc.;_x000D_ Voltage Signal Input Range: 0V to +5V_x000D_ Control Accuracy: 0.32_x000D_ Rated Voltage: 12V~24V/DC (11V/Minium~30V/Maxium, Limit Voltage)_x000D_ No-Load Current: 500mA (Current Limit: 5A, Recommended to Use A Switching Power Supply or Battery Greater than 5A)_x000D_ Limit Angle: 150 or 0~300(Maxium) The Steering Gear Has Electronic Limit Adjustment_x000D_ Analog Voltage Mode: 0V-5V Input Voltage (0.22V Corresponds to 0, 4.78V Corresponds to 300)_x000D_ Material: Gear and Shaft: Alloy Steel; Gear Box: Cast Aluminum_x000D_ Weight: Approx. 550g / 19.4oz_x000D_ Dimension Size: Approx. 95 x 60 x 110mm / 3.7 x 2.3 x 4.3in_x000D_ Mechanical Life: >1,000000 Cycles/Full Load (Conservative Value)_x000D_ Limit Parameters_x000D_ Limit Voltage: 11V-30V/DC(Maxium)_x000D_ Current Limit Value: 5A0.2A(Maxium)_x000D_ Working Angle: 150 or 0~300(Maxium)_x000D_ RC Mode: 1ms Pulse Mode: 1ms~2ms (Pulse Width)/50Hz~333Hz (Frequency)_x000D_ 2ms Pulse Mode: 0.5ms~2.5ms (Pulse Width)/50Hz~333Hz (Frequency)_x000D_ Analog Voltage Mode: 0V-5V Input Voltage 0.22V Corresponds to 0, 4.78V Corresponds to 300)