Product Description: Name: Free Bending Atomizing Nozzle Material: Plastic+brass+aluminium alloy Working pressure: 1.5~5 Bar Maximum pressure: 10 Bar Flow rate: 10~24 L/H( Above 2 bar) Connection size : 6mm 8mm 10mm 12mm(OD) Application: Irrigation,watering,Humidification Landscaping,cooling,dust-removalig,etc. Packing include: 8 type optional Type 1 : 6Pcs x 6mm Free Bending Atomizing Nozzle Type 2 : 6Pcs x 8mm Free Bending Atomizing Nozzle Type 3 : 6Pcs x 10mm Free Bending Atomizing Nozzle Type 4 : 6Pcs x 12mm Free Bending Atomizing Nozzle Type 5 : 6m x 6mm PU tube Type 6 : 6m x 8mm PU tube Type 7 : 6Pc x 6mm end plug Type 8 : 6Pc x 8mm end plug Description: The nozzle has a built-in aluminium alloy tube, which can be bent and fixed at any 360 degrees, which is convenient for adjusting the place where the spray is needed and specifying the direction; It is recommended that the water pressure is above 2 bar and the water volume is 24L per hour. Adjusted to the jet state, the amount of water per hour is 72L. The longer the length of the tube, the greater the water pressure required; The new material PE pipe can withstand 10 kg of pressure. Copper sprinklers and tubes have a long service life and good atomization effect.