MPP SOLAR CHARGING CONTROLLER 12V MPPT SOLAR CHARGING CONTROLLER SOLAR CHARGING CONTROLLER MPPT 24V SOLAR CHARGING CONTROLLER 24V SOLAR CHARGING CONTROLLER 12V SOLAR CHARGING CONTROLLER SOLAR PANEL CONTROLLER MPPT SOLAR PANEL CONTROLLER 48V SOLAR PANEL CONTROLLER 24V SOLAR PANEL CONTROLLER MPPT SOLAR CHARGING CONTROLLER Multiple compatibility: support 12V/24V/36V/48V solar panels, applicable to many types of batteries. High efficiency charging: adopt MPPT technology with maximum efficiency up to 98%, high sampling accuracy. High output current: maximum output current up to 100A, meeting the requirements of high power load, stably control the charging current and load supply power. Multiple protections: Equipped with overvoltage, undervoltage, overcurrent and short circuit protection for safe operation. Easy installation: simple wiring method, convenient and quick installation. Also, the LCD display can display current, temperature and power. LIST OF PACKAGES 1 x Solar Charging Controller 1 x User Manual 12V MPPT SOLAR CHARGING CONTROLLER This is a solar charging controller. It regulates and controls the charging and discharging conditions of the battery and controls the output power of the solar cell components and the battery to load according to the load demand for power. Prevent battery overcharging, over-discharge and reverse charging of the solar panel at night. SOLAR CHARGING CONTROLLER MPPT 24V Rated current: 100A (max. ) Maximum photovoltaic voltage: 12V/24V/36V/48V solar panel Color: as shown Material: aluminium, plastic Size: 19,00 x 18,00 x 7,00 cm / 7,47 x 7,07 x 2,75 inches Multiple compatibility: 12V/24V/36V/48V solar power support, applicable to many types of batteries. High-performance charging: adopt MPPT technology with maximum efficiency up to 98%, high sampling accuracy. High output current: maximum output current up to 100A, meeting the requirements of high power load, stably control the charging current and load power supply. Multiple protections: Equipped with overvoltage, undervoltage, overcurrent and short circuit protection for safe operation. Easy installation: simple wiring method, convenient and quick installation. Also, the LCD display can display current, temperature and power. LCD liquid crystal display: Large LCD display, battery status display, solar panel operating status display, mode control display, load output status and display all parameters, normal status and error display. 7 operating modes: charging mode, lighting control mode, lighting control + time delay control mode, general control mode, manual control mode, time control mode and test mode (test mode is intended for use in factory tests only). 4 types of voltages, automatic identification: DC 12 V/24 V/36 V/48 V are identified automatically. Large cross-section wiring connector: use connectors with large cross-section and large spacing, 16mm diameter wires can be installed. The 7mm wire spacing increases insulation efficiency and installation reliability, effectively reducing current and voltage drop while reducing losses. Aluminum alloy compacted heat sink: MOS pipe is used to block the heat sink structure, heat dissipation is more even and not ma concern about temperature rise caused by MOS tube. The high heat dissipation capacity can work normally at 55°C, and at the same time it is equipped with the functions of preventing overcharging, overvoltage, low output voltage DC, high voltage protection and reverse polarity protection, etc.