AMOLED LCD Screen for Asus ROG Phone 6 with Digitizer, Fully Assembled Before Installation Notes Tip 1: Test before installation Do not remove any protective film or label when testing. Please be aware of static electricity issues. Before attempting any repair, always ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Make sure to wear goggles and be careful not to cut your fingers on glass shards. Tip 2: Simulate Testing Screen replacement is a very fragile product. We strongly recommend testing before installation. Please simulate testing, which means take the phone apart, (motherboard + LCD or screen) connect audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can't display, please contact us at the first time. Please do not force it to be installed in the phone. We will not be responsible once the screen is installed. Tip 3: Do not over-bend the cable Make sure the LCD cable is not over-bent. Bending more than 90 degrees will cause a black screen display. About the product1. Replacement LCD Screen + Touchscreen Digitizer Assembly for ASUS ROG Phone 62. Replace your damaged or unworking items with new ones3. Make your device look fresher than ever4. Fits perfectly and works properly5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible for any damages once the screen is installed