Cordless Robotic Pool Cleaner IPX8 High Precise Filter 160mins Runtime Automatic Pool Vacuum Robot for Spa Pools Swimming Pool EU Plug Item Type: Pool Cleaning Robot Material: ABS + electronic components Battery: Built in Lithium Battery 7500mAh (Shipped with buil in battery) Size: Approx. 320 x 320 x 200mm / 12.6 x 12.6 x 7.9in Battery Life: 160min (full charge) Charging Time: 220min Charging Voltage: 12.6V Filter Mesh Density: 180mm / 7.1in IP Rating: IPX8 Maximum Submersion Depth: 3 meter Maximum Cleaning Area: Approx. 1000㎡ Water Temperature Range: 10℃-35℃ Features: LS2335 is an automatic pool cleaner control board. It features automatic obstacle avoidance, liquid detection, direction indicator, low battery reminder, motor lock detection, and low battery side stop function. 1. Automatic Obstacle Avoidance: If obstacles are encountered underwater and can't move forward, it will automatically reverse drive after 5 seconds timeout. 2. Liquid Detection: When liquid is detected, it will control the motor to move forward to avoid the machine from rotating in water. 3. Direction Indicator: LED real time feedback machine motor direction. 4. Low Battery Reminder: LED feedback low battery status (LED blinking in the middle), reminding to charge in time. 5. Motor Blockage Detection: In complex underwater conditions, detect motor blockage and cut off output protective in time. Low battery side stop: After low battery prompt, it will stop when it encounters obstacles for the first time, facilitating salvage. (May vary in different scenarios)