Color: Random color, do not accept designation Material: Composite material Note: Smoke generator heating wire is 6V, blower voltage is 6V. It may be damaged if voltage exceeds 6V. A voltage reduction plate must be used if voltage exceeds 6V. Compatible with 6.0S and 6.1S (160A, with 160A marked on the shell) main boards. For 5.3, 6.0, and 6.1S (without 160A marked on the shell) main boards, a voltage reduction plate must be used. Connect the heating wire to the voltage reduction plate (default output is 6V). Connect the heating wire and blower motor in parallel to the voltage reduction plate OUT +-. Connect IN+- to the main board port for smoke generator. Air blower current is approximately 0.3A, heating wire requires approximately 1.2A. Package Contents: 1 x Smoke Generator Only the above package content is included; other items are not included. Note: Light reflection and differences in display screens may cause slight variations in color between the image and the actual item. Measurement allows an error of +/- 1-3 cm.