[Operating Instructions]: [1] Power on: the red light, blue light and green light will flash once each and then turn off. [2] Standby: The red light is breathing and flashing, and when the temperature reaches the highest level, it will automatically change to the blue light in the middle range. [3] Working status: The indicator light is always on (high range: the red light is always on, middle range: the blue light is always on, low range: the green light is always on) [Using instructions]: [4] Press and hold down power for 3 seconds: enter standby mode or power off [5] Click the switch button: switch gears [How to use the switch]: Press and hold for 3 seconds to turn on the phone, the red the breathing light turns on. After reaching a certain temperature, it will automatically turn blue. Press it once to change to the blue light. The temperature is average temperature. Press twice and it will turn green. The temperature is the lowest, press three times for the red three-level high temperature, press and hold for 3 seconds to turn off. 22MM controlled inner diameter, suitable for most motorcycles. One-piece molding prevents rain and dust gets into internal corrosion parts, making the life longer and . Built-in intelligent temperature control chip, three levels of adjustable temperature, intelligent temperature control is . Double throttle cable buckle, installation area. Sealable and open mouth does not affect the installation of handle plugs on the outside of the handle, so that lights and other decorative accessories can be installed. The product has added a standby mode. After switching to standby mode, the electric heated handle will automatically adjust the temperature to about 50 degrees. Handle temperature: low temperature 40C, medium temperature 50C, high temperature 60C (the data above is obtained from experiments, the laboratory room temperature is 15 -20C, the specific values due to objective factors such as voltage and environment) There may be slight fluctuations, for reference only)< br/> Product wiring: 1. Connect to the circuit of the motorcycle electric door lock (behind the key), the red wire to the positive output wire of the electric door lock, and the black wire to any negative pole or ground of the car [This is suitable for those who don't want to use it, riders who are in standby mode but tend to forget to turn off the switch] 2. Connect to the positive and negative poles of the battery. The red wire is connected to the positive battery terminal [+], and the black wire is connected to the negative battery terminal [-]. Warm reminder: When wiring, connect red to the positive pole and black to the negative pole. If the connection is reversed, the switch will burn, but the handle will be heated, so when plugging in, please confirm the positive and negative poles before wiring to prevent burns. Suitable pipe diameter: 22mm Input voltage : DC12V Power: Red light 35W, Blue light 25W, Green light 17W Handle type: Sealing or opening electric heating handle Switch type: Multi-level temperature control switch Applicable models: 12V motorcycles with handlebar diameter of 22 mm Due to different parts, there may be differences in the appearance, color and printed text of the product, which does not affect the use. Color: Black Material: Nitrile material size: Left handle: 137x30MM; handle: 125x30mm Package Contents: 1 Set x Motorcycle Hand Heated Grips Only the above package contents, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture is slightly different from the real thing. The permissible measurement error is +/- 1-3 cm.