Description: Battery test process can adjust the discharge current, if you need to re-adjust the termination voltage, you can pause by pressing the switch at the start and stop the discharge modification. ( Pause discharge will return to the settings page, this time discharge data is not lost, if necessary, you can long press clears the data until the start-stop switch 0.000Ah). Tester automatic storage can record setting parameters, and record all parameters and status at the end of the test process and test power failure alarm status, re-transmission of all automatically restored. Made of high quality high density fiberboard, it's strong and durable. The length is 10cm, width is 7cm, height is 6cm. It's very suitable for power test, adapter test, engineering acceptance, battery monitoring, assembling power adapter, etc. Item Name: Battery Capacity Tester Material:Copper,Aluminium,High Density Fiberboard Maximum Power: 60W And 110W Working Mode: Single Mode Constant Current (CC) Discharge Current: 0.20-9.99A (Step 0.1A or 0.01A) Discharge Current Error: 0.7%-0.01A (Maximum Maximum Error of Capacity Test: 0.5A 2.5%, 2A 1.5%, 5A And Above 1.2% Discharge Voltage: 1.00-30.00V Maximum Error of Voltage Measurement: 0.8%+-0.02V Battery Test Value: 999.9Ah or 9999Wh(Highest Statistical Value) Offline (Termination) Voltage Setting Range: 1.0-25.0V Step 1V or 0.1V Size:10cmx7cmx6cm/3.94inx2.76inx2.36in Notes: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Package Includes: 1 X Battery Capacity Tester