00R10 SOLAR CONTROLLER CHARGING CONTROLLER 10A, for 12/24V photovoltaic panels with LCD display and USB ports Only now promotional offer. Regular price PLN 70. This series also includes regulators 20A, 30A, 40A, 50A and 60A. If you want a better regulator, choose this one, offer: 7121574884 If you are looking for a stronger regulator, then the offer: 8485358526 TECHNICAL DATA: This unique regulator belongs to a new family of products equipped with advanced work monitoring systems. Good quality control electronics are installed in the standard housing. It is solidly made on the basis of reputable components. Mimo its relatively low price, it boasts high effectiveness. If you are looking for a cheap and good regulator, this is probably the best choice. Basic operating parameters: Maximum permissible charging and discharging current 10A. So for 12V batteries it is 120W, and for 24V 240W batteries! Output to USB max 2A port. Own power consumption 10mA The maximum voltage of connected photovoltaic panels must not exceed 50V. Operating mode PWM with temperature compensation and periodic desulphurisation function of batteries. On the display of the controller, you can observe the current charging voltage of the batteries and set / select the mode of operation with gel, acid and AGM batteries as well as manually program the voltage and time settings of switching on the output. DESCRIPTION OF THE ACTION: The controller ma za the task of converting the energy supplied from the panels to the battery. It protects against overcharging of batteries and excessive discharge by receivers connected to the regulator. These receivers can be, for example, LED, ale bulbs, e.g. The converter should not be connected. By selecting the function button, you can call the selected parameter and modify it za using the arrow buttons and approve. It is possible to change the types of battery, charging and discharging voltage and the time of switching on the power supply of the connected receiver after dark. APPLICATION: Charging controller for solar panel power systems 12V/24V - 10A, Controls the charging process, protects the battery from deep discharge. This controller has the function of temporary lighting control after dark, sunlight does not reach the solar panels and the switch activates the DC output for a specified period of time. It also works in manual mode controlling the process of battery discharge. It does not have energy converting meters (kWh, A and Ah). Related products