Wi-Fi smart roller shutter controller The module is designed for remote, unlimited control of blinds, curtains, etc. using the TUYA application for mobile devices. TECHNICAL FEATURES: You no longer have to hold the button to fully open or close the blind. You can also stop the roller blind with the traditional button Control range: unlimited (can be controlled from anywhere on Earth with access to the network) Controllable with a mechanical switch Works with Google Home and Amazon Alexa WiFi range: up to 30m (depending on environmental conditions) Dimensions: 46x46x18mm Works with both MONO and BISTABLE switches! Many configuration options The controller allows you to control the roller shutters depending on the change in weather conditions, schedule or location, sample scenarios open the blinds at 7.00 - close the blinds 15 minutes after sunset close the blinds when the wind in your area exceeds 3m/s close the blinds by 60% after sunset after leaving the house, close all blinds ( location ) TECHNICAL SPECIFICATIONS Product type: WIFI curtain module Voltage: AC100-240V 50 / 60Hz max. load: 3A Working frequency: 2.412 GHz-2.484 GHz temp. work: -10 ℃ + 40 ℃ Protocol: WIFI IEEE 802.11b/g/n Operation range: <100m Dimensions (WxDxH): 39.2 x 39.2 x 18 mm IP degree of protection: IP20 FAQ Q1: What should I do if I can't configure the switch module? a. Check that the machine is turned on. b. Make sure your cell phone and switching module are on the same 2.4 GHz WIFI network. c. Is it in good internet conditions. d. Make sure the password entered in the application is correct. to me. Make sure the wiring is correct. Q2: What if WIFI turns off? You can still control the device connected to the switch module with traditional switch and when WIFI is on the active device connected to the module will again be active connect automatically to the WIFI network. Q3: What should I do if I change WIFI or Change Password? You need to reconnect our Wi-Fi switch module to new Wi-Fi network in accordance with the application manual. Q4: How to reset the device? Turn on / off the device 5 times until the indicator comes on The flash lamp. Multiple mounting options The set includes a bracket that extends the mounting options installation in a box on a manual switch wall mount DIN rail mounting Voice control After connecting the Tuya Smart Life application with your Google Home account, you can control the device using voice commands Supported voice functions: Open the blind Close the blind Stop the blind