Product information: Type: Iron cutter Material: Stainless steel Product alias: Electric scissors Full length: 150 (mm) Product size: 14*24*6cm Allowable cutting thickness Ordinary iron plate: 1.8mm Stainless steel plate: 1.2mm Copper and aluminum plates: 2mm Plastic plywood car : 2mm Packing List: 1 * Cutter SUITABLE FOR MANY MATERIALS: Sheet metal nibbler for electric drill will handle many problems easily. Suitable for steel, stainless steel, copper, plastic, corrugated iron, pipes, complex profiles, copper, aluminium, formica, plastic, fiberglass and also soft materials such as denim, leather, paper or cardboard. NOTE: Maximum cutting capacities - iron/steel plate 1.8mm, stainless steel 1.2mm, copper/aluminum plate 2mm, plastic/fibreboard 2mm. The minimum diameter of the hole to be cut: 12 mm. DOUBLE HEAD METAL NIBBER & 360 DEGREE ADJUSTMENT: Thanks to the 360 degree adjustable cutting head, you can easily treat all complex profiles, such as straight lines, curves, lines and circles. Gutters, roof profiles or templates can be precisely cut. Supplied handle is comfortable, fits the ergonomic design. PERFECT CUTTING SPEED & BEST CUTTING RESULT: Suitable for the pneumatic/electric drill with a speed of 1500-3000 rpm. Perfect composition of a powerful tool for cutting and circular cutting attachment, one can easily cut in any desired direction and angle. Best cutting result without burrs on the cutting edges. Cutting speed: 2 M per minute at 3000 rpm.