Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90L ) 26s

‏429.00 ₪
+ ‏23.49 ₪ משלוח

Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90L ) 26s

  • מותג: Unbranded

Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90L ) 26s

  • מותג: Unbranded
מחיר מומלץ לצרכן: ‏849.00 ₪
מחיר: ‏429.00 ₪
החיסכון שלכם: ‏420.00 ₪ (49%)
נמכר על ידי:
‏429.00 ₪
+ ‏23.49 ₪ משלוח

במלאי

אנו מקבלים את אמצעי התשלום הבאים

תיאור

Condition: 100% Brand New <br>Item Type: Cylinder <br>Material: Aluminum Alloy <br>Color: As Pictures Shown <br>Optional Type: ACK63-90R, ACK63-90L <br> <br>Inner Diameter: Approx. 63mm / 2.5in <br>Piston Rod Outer Diameter: Approx. 20mm / 0.8in <br>Action Type: Double Action <br>Working Medium: Air (filtered by a Filter Screen Above 40μm) <br>Operating Pressure Range: Approx. 0.15-1.0MPa (22-145psi) <br>Guaranteed Pressure Resistance: 1.5MPa (215psi) <br>Working Temperature (℃): -20-80 <br>Operating Speed Range: Approx. 50-200mm/s 2-7.9in/s <br>Travel Tolerance Range: 1.0 <br>Rotation Angle Tolerance Range: Approx. ±1.5° <br>Buffer Type: None <br>Take over Caliber: PT1/8 <br>Installation and Use <br>1. When the cylinder clamps the workpiece, it must be performed within the clamping stroke, and the clamping operation cannot be performed within the rotation stroke. <br>2. The clamping plane must be perpendicular to the cylinder axis. After the workpiece is clamped, please do not move the workpiece. <br>3. Before piping the cylinder, the debris in the pipe must be removed to prevent debris from entering the cylinder. <br>4. The medium used in the cylinder should be filtered by a filter element above 40μm before use. <br>5. When the cylinder is removed and not used for a long time, pay attention to rust prevention on the surface, add dust blocking caps to the intake and exhaust ports, and apply rust prevention oil to the end of the piston rod.<br>1、This is a double?acting rotary clamping corner press cylinder with an inner diameter of 63mm and the maximum working pressure reaches 1.0MPa the maximum operating speed can reach 200mm/s. <br>2、The cylinder block is made of aluminum alloy, with high density and high strength, supporting long time and high load work. <br>3、The inner wall of the cylinder mirror process, the surface is hard oxidized to extend the service life of the cylinder. <br>4、The hard protective layer is resistant to wear and corrosion and can be used in harsh working environments. <br>5、The cylinder is small in size and has simple structrue, you can carry it easily and install it in a few minutes.1 x Cylinder Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.
  • מזהה Fruugo: 428219790-899763782
  • EAN: 6471506039599

מידע על בטיחות המוצר

אנא עיין במידע בטיחות המוצר הספציפי למוצר זה המתואר להלן

המידע הבא מסופק על ידי קמעונאי צד שלישי עצמאי המוכר מוצר זה.

תוויות בטיחות למוצר

CE Mark
אזהרות בטיחות: Not suitable for children under 36 months
מרכיבים: Others

משלוחים והחזרות

שילוח תוך 24 שעות

  • STANDARD: ‏23.49 ₪ - משלוח בין יום ה׳ 06 נובמבר 2025–יום ו׳ 14 נובמבר 2025

משלוח מ- סין.

אנו עושים כמיטב יכולתנו להבטיח שהמוצרים שאתם מזמינים יישלחו אליכם במלואם ובהתאם למפרט שלכם. עם זאת, אם תקבלו הזמנה חלקית, או פריטים שונים מאלו שהזמנתם, או שיש סיבה אחרת לכך שאינכם מרוצים מההזמנה, באפשרותכם להחזיר את ההזמנה, או כל אחד מהמוצרים הכלולים בהזמנה, ולקבל החזר מלא עבור הפריטים. הצג מדיניות ההחזרים המלאה

פרטי תאימות המוצר

אנא עיין במידע התאימות הספציפי למוצר זה המתואר להלן.

המידע הבא מסופק על ידי קמעונאי צד שלישי עצמאי המוכר מוצר זה.

יצרן:
המידע הבא כולל את פרטי יצירת הקשר של היצרן של המוצר הרלוונטי הנמכר באתר Fruugo.

  • Luminary Lane
  • Dongguan Zuiyu Electronic Technology Co., Ltd.
  • Room 401, No. 19, Dongxiang, Yanggonglang, Qiaotou Town, Dongguan City, Guangdong Province
  • Dongguan
  • CN
  • 523520
  • simona14@163.com
  • 17512067209

האדם האחראי באיחוד האירופי:
המידע הבא כולל את פרטי יצירת הקשר של האדם האחראי באיחוד האירופי. האדם האחראי הוא המפעיל הכלכלי הממונה המבוסס באיחוד האירופי, אשר אחראי לחובות הציות הקשורות למוצר הרלוונטי הנמכר לאיחוד האירופי.

  • Jean Luc
  • In Memoria Futuri SAS
  • 3 RUE DU PAS DE LA MULE 75004 PARIS
  • Paris
  • FR
  • 75004
  • infoapexchen@gmail.com
  • 33 745713901