Features: 1.Function: Car blind spot monitoring system is a vehicle assistance device that can greatly help you detect possible collision risks in your blind spot while driving. 2.Principle: 4 radar probes are installed on the rear bumper of the car to detect speed signals. The system analyzes and processes the signals sent to understand the distance, speed and direction of movement of the vehicle behind. 3.Flashing Reminder: Through the system algorithm, when a vehicle is detected approaching in the blind spot, the indicator light flashes. If the driver does not notice the indicator blinking and is ready to change lanes, the system will sound an alarm. 4.Safe Protection: Continuous detection and alerting can prevent traffic accidents caused by potential hazards, such as bad weather, driver negligence, blind spots in mirrors, and novice drivers during driving. 5.Performance: IP67 waterproof, operating voltage is 10.6V?16V, reversing radar system detection distance of 0?120cm/0?47.24in, and the best detection range within 0.5 meters, sensitive and accurate. Specification: Item Type: Car Blind Spot Monitoring System_x000D_ Material: PVC and metal_x000D_ _x000D_ _x000D_ BSD System:_x000D_ 1. Detection Distance: Approx: 0-5m/0-196.85in_x000D_ 2. Detection Accuracy: 5cm _x000D_ 3. Operating Frequency: 58KHZ and 2KHZ_x000D_ 4. Waterproof Grade: IP67_x000D_ _x000D_ Reversing Radar System:_x000D_ 1. Detection Range: 0-120cm/0?47.24in_x000D_ 2. Detection Accuracy: 5cm_x000D_ 3. The Best Detection Range: Within 0.5 m_x000D_ 4. Operating Frequency: 58KHZ and 2KHZ_x000D_ 5. Sensor Detection Range: Horizontal Angle: 12015; Vertical Angle: 60 15_x000D_ 6. Sound: 85-105 decibels (at 10 cm)_x000D_ _x000D_ Controller:_x000D_ 1. Working Voltage: 10.6V-16V_x000D_ 2. Working Current: Less than 90mA_x000D_ 3. Operating Temperature: -30C-+80C