New in the box. Direct from manufacturer. Identical in appearance and operation to your (original equipment manufacturer) switch. This switch is the complete unit you need including buttons, circuit board, plug ins, etc.INSTALLATION: If you have never removed or installed this switch please don't pay to have it done. It is an easy 5 minute job. Carefully pry up the plastic switch cover or bezel, the switch is attached to it with screws and your door wiring is plugged into the switch with a tabbed gang wire clip.Pull out the clip without tugging on the wiring. You may need to depress a tab with a small screwdriver while doing this. Plug in new switch and test. Swap the cover onto the new switch and drop back in the door. Done!PLASTIC MOLDING COVERING SWITCH (OR "BEZEL"): This is a separate piece that easily detaches from the actual switch your are replacing. You do not need to buy the bezel or a used switch with the bezel attached (unless of course your bezel is broken or missing!)Model: Fitment Type: Direct ReplacementInterchange Part Number: 35750-S5A-A02ZAcolour: blackMaterial: Core board + plastic gluePackage Contents:1 * Glass lifting switchOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.