1、High Flexibility: Filament printing material has high flexibility and resilience. With PLA, can print hard and soft objects 2、High Purity: High purity, original materials, non doped waste, recycled materials. No plugging or insufficient squeezing 3、High Accuracy: High accuracy, and the wire diameter tolerance is stable at ±0.03mm, which is more beneficial to the printing effect 4、Good Printing Effect: Good printing effect, non edge warping, non air bubbles, good printing effect, glazed, delicate and accurate colour 5、Good Tensile Strength: Good tensile strength, ductility, fluidity, low shrinkage, high toughness, low weight, environmental protection and healthier Item Type: Filament Printing Materials Material: Plastic Physical Properties: Standard Value Density: 1.24g/cm³ Melts Flow Rate (190℃, 8.7Kg): 1.8g/10min Water Absorption (Saturated, 23℃): 0.30% Mechanical Properties: Standard Value Tensile Strength: 48.5MPa Flexural Strength: 82.7MPa Notched Impact Strength (IZOD, 23℃): 16Kgj/m Breaking Elongation: ≥2.5% Heat Distortion Temperature: 60℃ Accuracy: Standard Value Diameter (1.75mm): Approx. 1.75±0.03mm / 0.06in Roundness Deviation: ≤0.03mm 1 x Filament Printing Materials