Soil-Clik simplifies the detection of soil moisture. The Soil-Clik probe uses proven technology to measure moisture in the root zone. When the probe detects that the soil has reached the desired moisture level, it interrupts irrigation and thus prevents waste of water.Soil-Clik has two components: a moisture sensor probe, which is placed on the ground; and an electronic module, which communicates with the probe and the controller. The probe is easy to install: just bury it at the right depth of the roots of your plants. It can be placed up to 300 meters from the controller. Easy button operation allows you to make adjustments to the desired moisture level, with an immediate update of the actual measurements.The module connects to all Hunter controllers with CA power and works with most controllers of other manufacturers fed by CA. Soil-Clik can be programmed to turn off the watering when detecting the proper moisture.With a five-year warranty from Hunter, Soil-Clik is an effective water savings instrument, whether alone or accompanied by Solar Sync, for a solution that adapts to the environment.MAIN BENEFITSSee immediately the level of moisture and the condition of the soilSuppression with a touch, which allows you to ignore soil moisture in special conditionsLow voltage external cabinet fed by the host controllerConnect it to Hunter's sensor inputs or use it to interrupt the ordinary wires of virtually any 24 VCA irrigation systemUse it with the Sync solar sensor to get the maximum water saving