Selling Point Note Pls Use the vehicle fitment we've provided within the body of the listing to confirm vehicle fitment.If you can not make sure which item fit for your car,please send the VIN CODE to us confirm it before order. No sensor programming Required :The Tire Preure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning".Simplified Relearn : OBDII required Application For Chevrolet Colorado(from 2003-11 to 2014-03)For GMC Canyon(from 2003-11 to 2013-12)For Hummer H3(from 2005-05 to 2011-07)For Hummer H3T(from 2008-06 to 2010-07)For Isuzu I-Series(from 2005-07 to 2008-08)For Pontiac Montana SV6(from 2009-01 to 2009-11) SPECIFICATION :Replace For Part Number:15122618Battery Life: ABOUT 3 YEARSOperating Frequency: 315MHzPACKAGE CONTENT :NORMAL PACKET COMPREHENSIVE VEHICLE COVERAGEInstallation Proce1. Loosen the tire: Remove the valve cap and core and deflate the tire.2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 oclock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Aemble the sensor body against the rim and tighten the screw.5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-DIMEANI official store