Features: This is a normally open proximity switch sensor with a detection distance of 8mm to 10mm. When the proximity switch is close to a target object, it will send out a control signal. Widely used in automatic control industries for detecting, controlling, and non-contact switching applications. High sensitivity, quick response, and stable performance. Non-contact detection helps prevent damage to both the sensor and the target object. Specifications: Model: LJ18A3-8-Z/EX Detection distance: 8mm ±10% Setting distance: 0–7mm Delay distance: <10% of detection distance Detection object: Magnetic metal (detection distance decreases with non-magnetic metals) Standard detection object: Iron 30×30×1mm Response frequency: 0.5kHz Current consumption: N.P type: <13mA, D type: <0.8mA, A type: <1.7mA Control output: N.P type: <300mA, D type: <200mA, A type: <400mA Loop protection: N.P.D type: reverse connection protection, surge absorption, load short circuit protection; Type A: surge absorption Ambient temperature and humidity: -30°C to 65°C, 35–95% RH Temperature influence: - Temperature range -30°C to 65°C at 23°C: ±15% detection distance - Temperature range -25°C to 60°C at 23°C: ±10% detection distance Insulation impedance: >50MΩ Housing material: Brass nickel plating Detection surface: ABS Package list: 1 × Inductive Proximity Switch Note: 1. Please allow slight variation due to manual measurement. 2. Monitor display colors may vary. Thank you for your understanding.