Motor Vehicle Sensors Description: Replace For Part Number: 1862980 EV6T-1A180-CB EV6T-1A150-CB EV6T-1A180-DB EV6T-1A150-DB EV6T-1A180-DC Operating Frequency: 433MHz Package Content: 1 / 4 TPMS SENSOR Application: For Ford B-MAX (JK8)(from 2014-03 to 2018-04) For Ford C-Max (DXA)(from 2014-03 to 2019-12) For Ford Ecosport (JK8)(from 2014-10 to 2017-12) For Ford F-150(from 2014-03 to 2015-03) For Ford F-150(from 2015-04 to 2021-04) For Ford Fiesta Van(from 2014-03 to 2017-07) For Ford Fiesta VI(from 2014-03 to 2017-04) For Ford Focus III(from 2014-03 to 2018-08) For Ford F-Series(from 2014-03 to 2015-07) For Ford F-Series(from 2015-08 to 2021-04) For Ford Ka+(from 2016-06 to 2020-12) For Ford Kuga(from 2014-03 to 2020-06) For Ford Mondeo (MK5)(from 2014-10 to 2017-08) For Ford Ranger(from 2014-03 to 2022-09) For Ford Tourneo Connect(from 2014-07 to 2018-02) For Ford Tourneo Courier(from 2014-10 to 2022-04) For Ford Transit Connect(from 2014-03 to 2018-02) For Ford Transit Courier(from 2014-10 to 2022-04) Note: 1. If you can not make sure which item fit for your car,please send the VIN CODE to us confirm it before order. 2. No sensor programming Required The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or re-learning Simplified Relearn : OBDII required *Installation of TPMS is recommended to be performed only by trained professionals. 3. Installation Process . Loosen the tire: Remove the valve cap and core and deflate the tire. . Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 oclock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head. . Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve. . Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw. . Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim. FAQ Q: How long does the battery last? A: About 3 years. Q: Did they tpms sensor need to make program? A: The Tire Pressure Sensor come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or re-learning Q: How to Relearn Procedure? A: Trigger required. Picture Details