Motor Vehicle Sensors Description: Replace For Part Number: 8532732 36238521796 36318532732 Operating Frequency: 433Mhz Package Content: 1 / 2 TPMS SENSOR Application: For BMW K50 (R 1200 GS) (10/2011 07/2018) K52 (R 1200 RT) (01/2013 07/2018) K53 (R 1200 R) (11/2013 07/2018) K54 (R 1200 RS) (06/2014 07/2018) K26 (R 900 RT, R 1200 RT) (11/2003 06/2014) K27 (R 1200 R) (11/2005 07/2014) K28 (R 1200 ST) (05/2003 11/2007) K29 (R 1200 S, HP2 Sport) (11/2004 12/2006) K40 (K 1200 S, K 1300 S) (04/2003 09/2015) K43 (K 1200 R, Sport, K 1300 R) (03/2004 07/2015) K44 (K 1200 GT, K 1300 GT) (11/2004 10/2010) K48 (K 1600 GT, K 1600 GTL) (01/2010 07/2018) K61 (K 1600 Bagger) (01/2017 07/2018) K70 (F 700 GS) (06/2011 12/2017) K71 (F 800 S, F 800 ST, F 800 GT) (12/2004 07/2018) K73 (F 800 R) (12/2005 07/2018) K17 (C evolution) (04/2013 07/2018) K18 (C 600 Sport, C 650 Sport) (02/2011 07/2018) K19 (C 650 GT) (01/2011 07/2018) Note: 1.If you can not make sure which item fit for your car,please send the VIN CODE to us confirm it before order. 2. No sensor programming Required The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or " re-learning ". Simplified Relearn : OBDII required *Installation of TPMS is recommended to be performed only by trained professionals. 3. Installation Process . Loosen the tire: Remove the valve cap and core and deflate the tire. . Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head. . Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve. . Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw. . Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim. FAQ Q:How long does the battery last? A: About 3 years. Q: Did they tpms sensor need to make program? A: The Tire Pressure Sensor come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or re-learning Picture Details