1、The product have strong suction force, which is an ideal tin removal tool for thick film integrated circuits and large solder joints of large components 2、Support to be used with one hand independently, and can be removed for a long time after 5 minutes of power on 3、A good helper to improve work efficiency during maintenance. Automatic soldering is fast and convenient 4、Equipped with three specifications nozzles (1.0mm, 1.5mm, 2.5mm), easy for you to replace 5、Come with a nozzle cleaner, which helps to prevent nozzle clogging the next time Item Type: Electric Solder Sucker Material: Plastic + stainless steel Model: BBT-580 Heater Power: 30W Electromagnetic Power: 350W (momentary) Insulation Class: E class Working Method: Continuous Product Category: Chip-level repair tools-motherboard repair tools Equipped with three nozzles (approx. 1mm / 0.04in, 1.5mm / 0.06in, 2.5mm / 0.1in) How to Use: 1. First connect the power supply and let the suction nozzle heat up. 2. It is ready to use after 5 minutes. 3. Put the suction nozzle on the part that needs to be removed from the solder. 4. When the solder is dissolve, the tin can be sucked out by pressing the button.5. Press and hold the handle switch, remove it from the solder joint, and release the switch to automatically spray out the pot. Total Length: Approx. 245mm / 9.6in Machine Diameter: Approx. 32mm / 1.3in Head Length: Approx. 85mm / 3.3in 1 x Electric Solder Sucker 3 x Nozzle 1 x Nozzle Cleaner 1 x User Manual