Our hand mask powder DIY set is carefully prepared from model powder: talc powder, sodium alginate, calcium chloride, and casting powder: calcium carbonate, calcium sulfate. _x005f_x000D_Designed for easy 3D hand modeling, freezing precious moments. _x005f_x000D_The method of use is extremely convenient: add molding powder and water to the barrel and stir evenly with a stirring rod. _x005f_x000D_Put your hands into the solution and wait for 3-5 minutes. _x005f_x000D_When the solution discolors and solidifies, gently shake your arms to remove it. _x005f_x000D_Put on gloves, add cast stone powder and water to another container and stir evenly with a stir bar. _x005f_x000D_Pour the mixture into the mold and tap the edge of the barrel to reduce air bubbles. _x005f_x000D_Wait for more than 30 minutes, wait for it to solidify, and then peel off the outer layer with a pointed stick. _x005f_x000D_You can use sandpaper to treat the surface of the model to make it more beautiful. _x005f_x000D_And the gap can be filled finely to improve the smoothness of the model surface._x005f_x000D__x005f_x000D_Net content: 1set _x005f_x000D__x005f_x000D_Product name: Hand mask powder DIY set _x005f_x000D__x005f_x000D_Keywords: hand mask powder _x005f_x000D__x005f_x000D_Gross weight: 227g _x005f_x000D__x005f_x000D_Ingredients: Model powder: talc powder, sodium alginate, calcium chloride, casting powder: calcium carbonate, calcium sulfate _x005f_x000D__x005f_x000D_Packaging size: 13.5*13.5*13.5cm _x005f_x000D__x005f_x000D_Product size: barrel: 13*12cm, model powder: 18*26cm, casting powder: 18*26cm, round sandpaper: 4.9*4.9cm, mixing stick: 0.9*11.3cm, bamboo stick: 0.4*7.5cm, gloves: 10.5*24cm _x005f_x000D__x005f_x000D_Box meter: 56*36*21.5cm _x005f_x000D__x005f_x000D_Weight of a box: 6.19kg _x005f_x000D__x005f_x000D_Shelf life: 3 years _x005f_x000D__x005f_x000D_Storage method: Please store it in a cool and covered area