Features: _x000D_ 1. Brand new and high quality. _x000D_ 2. Made of cast copper material, durable to use. _x000D_ 3. Adopt electric drive mode, it has stable performance. _x000D_ 4. Double suction mode increases efficiency and saves time _x000D_ 5. Widely used, suitable for cleaning caravan, boat, car, etc. _x000D_ _x000D_ Specification: _x000D_ Condition: Brand New _x000D_ Model: 3208 _x000D_ Motor Housing: Plastic _x000D_ Material: Cast Copper _x000D_ Drive Mode: Electric _x000D_ Uses: Boost Pump _x000D_ Pump Shaft Position: Horizontal _x000D_ Impeller Structure: Closed Impeller _x000D_ Number Of Impellers: Multiple Levels _x000D_ Impeller Suction Method: Double Suction _x000D_ Suction: 2-3 Meters _x000D_ Power: 100W _x000D_ Flow Rate: 6-7L _x000D_ Head: 90 Meters _x000D_ Outlet Protection Pressure: 8-10Kg _x000D_ Intelligent Double Pump Size: Approx. 165 * 100 * 62mm / 6.5 * 3.9 * 2.4in _x000D_ Left Inlet Diameter: 10mm _x000D_ Right Outlet, Flat Rib, Male Wire: 18mm _x000D_ Optional Color: Yellow, Black _x000D_ Weight: Approx. 1139g / 40.2oz _x000D_ _x000D_ Package List: _x000D_ 1 * Pump _x000D_ _x000D_ Note: _x000D_ 1. Do not use high temperature water or dirty water with a temperature exceeding 60 (sludge in dirty water will cause irreparable damage to the pump) _x000D_ 2. The pump can touch a small amount of water (drying after use), can not directly spray water to the motor pump, it is strictly prohibited to pump the motor pump in the water _x000D_ 3. The pump can not be placed in a humid place for a long time _x000D_ 4. Do not disassemble the machine or adjust the pressure setting screw (adjust the pressure setting screw without authorization, it may be fatal to the pump) _x000D_ 5. It is strictly forbidden to use the machine without the filter. The density of the filter is preferably above 80 mesh (impurities will cause damage to the pump) _x000D_ 6. The diameter of the water spray hole must meet the specified value, otherwise the motor pump will be damaged _x000D_ 7. For household use only, do not use it for commercial purposes (to reduce the service life to avoid excessive heat, and recommend intermittent work if conditions permit) _x000D_ 8. Please confirm the power supply before use. The power supply parameters must match the input parameters of the motor pump. _x000D_ 9. The recommended power cord should not be thinner than 0.75mm2 (copper core wire), the length is about 2.5 meters, do not need thin or long. If you really need to lengthen, you need to increase the wire diameter while lengthening, otherwise it will be due to electricity. The pressure drop of the source line is too large, resulting in a decrease in the performance of the motor pump. The thicker the better, the shorter the better, the length is enough to use) _x000D_ 10. It is recommended that the inner diameter of the outlet pipe should not be less than dia. 5.5, and the length should not exceed 10 meters (not too long and too thin, or it will affect the pressure flow and the effect of turning off the gun. (The thicker the better, the shorter the better, it is enough to use) _x000D_ 11. It is recommended that the inner diameter of the inlet pipe should not be less than 6, and the length of the inlet pipe should not exceed 1.5 meters when sucking water.(the coarser the better, the shorter the better) _x000D_ 12. When connecting pressurized water sources such as tap water, the inlet pipe can be appropriately lengthened, and the inlet pressure should not exceed 0.1MPA (1 kg force)