Use the original quick-release accessories to achieve horizontal ; use the two-claw adapter to achieve vertical . There are soft foams on the top and sides of the inner side of the cage, which can be firmly fixed after the camera is installed. Use rubber rings to enhance the damping of the screws, so that the screws will not loosen when riding motorcycles and bicycles, and there is no need to worry about the camera falling off the frame. The opening design at the battery cover makes it easier to replace the battery, and the use of the cage does not affect the opening and closing of the camera battery cover. Openings are reserved at the bottom of the cage and the USB cover, and the original quick-release accessories are installed seamlessly. The reasonable air avoidance design at the screw allows the screw and selfie stick to be easily screwed in, so you can enjoy a experience. Rich expansion: Dual cold shoe expansion interfaces are reserved, which can be expanded to add fill lights and microphones. The cage-free silicone lens protective cover allows the camera to be stored when not in use to avoid bumps and scratches. Light or display is different, the real color difference Material: Aluminum Alloy Color: As shown Package Contents: 1 x Camera Frame Case 1 x Lens protection cover 1 x vertical adapter 1 x wrench Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.