Smartwatch -Professional WiFi Test Tool ESP8266 WiFi Deauther Watch Black Highlights brand generic Professional WiFi Test Tool ESP8266 WiFi Deauther Watch Black Description: Deauther Watch is still an ESP8266 development board, but you can wear it as a smart watch. This ESP8266 development board comes with a 500mAh battery, OLED display and a 3-way momentary slide switch. It is installed with the latest ESP8266 Deauther software. With this software, you can perform different attacks to test WiFi networks. Please note that the ESP8266 only supports 2.4 GHz. For more details about the software, visit here. You can also use it to develop your own software. It is simple to use, like any other ESP8266 development board. Specification: GPIO and Hardware Information Screen: SH1106 1.3" OLED SDA Display: GPIO 5 (D1) SCL/SCK Display: GPIO 4 (D2) WS2812b LED: GPIO 15 (D8) Up Button: GPIO 12 Down Button: GPIO 13 Button selection: GPIO 14 High light LED: GPIO 16 Side button: GPIO0, RST What makes it special Only ~80mA power consumption Up to about 3-4 hours working Charging current 500mA 5dB FPC antenna and 2dB antenna included Protection: short, overcharge, overdischarge, temperature Size chart: Material: copper Size: about 100x80x50mm/3.94x3.15x1.97inch Package includes: 1 piece Deauther Watch Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item.Due to manual measurement, there may be 1-2cm error in size.