UNIQUE FEATURE- Remove the oil filter cap faster, , and easier. Even if the oil filter cap is extremely , oil filter cup helps complete the job effortlessly.DURABLE- 4.6mm thickness metal around the square hole. NOMORE CRACKED when you try to twist it hard.LONG LIFETIME- For and durable, without the problems of broken in half, stripped the filter housing etc. (: put a rag or sandpaper inside the wrench will help to grab filer tightly)- for - oil .USAGE- Easy of Use for installation and removal of oil filter Allows the spin-on filter to be turned with a 3/8 inch drive socket wrench.Product Type: Oil Filter WrenchManufacturer number: 7226277for oil with part number 11427673541stable profiled spring steel with 5mm thick reinforcement3/8 inch ratchet connection76mm 12 groovesApplicable to models:for models RnineT, R1200GS, R1200GS , R1200R, R1200S, R1200ST, R1200RT, R900RT (all air-cooled boxers), K1600GT, K1600GTL, HP2 , HP2 Megamoto, C602 Sport.The following models can also be equipped with different oil ; this oil filter key is not suitable for these: K1200S, K1200R, K1200GT (from construction year 06), F800GS, F800R, F800S, F800ST, F650GS, S1000RR, S1000R, S1000XRMaterial:Metalcolour:blackPackage Contents:1 * Oil Filter Wrench Removal toolOnly the above package content, other are not included.Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.