Reactor Kettle Vessel 50ml PTFE Chamber for Autoclave Hydrothermal Synthesis Reactor Kettle Lined Vessel

‏259.00 ₪
+ ‏23.99 ₪ משלוח

Reactor Kettle Vessel 50ml PTFE Chamber for Autoclave Hydrothermal Synthesis Reactor Kettle Lined Vessel

  • מותג: Unbranded

Reactor Kettle Vessel 50ml PTFE Chamber for Autoclave Hydrothermal Synthesis Reactor Kettle Lined Vessel

  • מותג: Unbranded
מחיר מומלץ לצרכן: ‏369.00 ₪
מחיר: ‏259.00 ₪
החיסכון שלכם: ‏110.00 ₪ (29%)
נמכר על ידי:
‏259.00 ₪
+ ‏23.99 ₪ משלוח

במלאי

אנו מקבלים את אמצעי התשלום הבאים

תיאור

Reactor Kettle Vessel 50ml PTFE Chamber for Autoclave Hydrothermal Synthesis Reactor Kettle Lined Vessel Specification: Volume:25ml/50ml/100ml/150ml/200 ml/250ml/300ml/500ml, other customized according to user needs Seal Structure: sealed by PTFE chamber Shell Material: stainless steel 304 Chamber Material: high quality PTFE Heating/ Cooling rate: 5c/min Max temperature: 220 Max pressure: 3Mpa Feature: 1.Insulation, high lubrication. 2.No adhesion, no poison;Anti-pollution, anti-leakage. 3.Good corrosion resistance, no harmful substances spill. 4.Pollution reducing, use safety. 4.With polytetrafluoroethylene bushing, acid and alkali resistant. How to use it : - Pour the reactant into the reactor kettle, and to ensure feeding coefficient is less than 0.8. - You should put the corrosive reaction into PTFE bush, and should be assured kettle body from corrosion. - Hydrothermal synthesis reactor will be placed on the heater, in accordance with the provisions of the heating rate of heating to the desired reaction temperature (less than the required safety temperature). - When finishing heating and need to cool, it's also in strict accordance with the provisions of the cooling rate operation, to facilitate the safety and reactor life. - After confirmation of intra-abdominal temperature below the boiling point solvents reaction system, it could be allowed to be open tank lid and do a follow-up operation. - Hydrothermal synthesis reactor each time after use to clean, to avoid corrosion. Kettle body, kettle lid seal line to pay particular attention to clean and prevent damage to the bumps. Notice : 1.Regarding import duties: If the customs points out that taxes and customs clearance must be paid, the buyer needs to pay the duties. We do not bear any duties or import taxes. If the buyer is unwilling to pay customs duties and customs fees, we will not refund. 2.About customs clearance: For countries that are difficult to pass through customs, such as: Brazil, Chile,Turkey, Argentina, etc. Make sure you have the ability to pass customs. We do not give a refund if the buyer cannot go through customs and Customs deducts the package. 3.If your place is remote ,then need to pay 38usd .
  • מזהה Fruugo: 363062595-788060009
  • EAN: 7291415176852

משלוחים והחזרות

שילוח תוך 3 ימים

  • STANDARD: ‏23.99 ₪ - משלוח בין יום ג׳ 21 אוקטובר 2025–יום ג׳ 28 אוקטובר 2025

משלוח מ- סין.

אנו עושים כמיטב יכולתנו להבטיח שהמוצרים שאתם מזמינים יישלחו אליכם במלואם ובהתאם למפרט שלכם. עם זאת, אם תקבלו הזמנה חלקית, או פריטים שונים מאלו שהזמנתם, או שיש סיבה אחרת לכך שאינכם מרוצים מההזמנה, באפשרותכם להחזיר את ההזמנה, או כל אחד מהמוצרים הכלולים בהזמנה, ולקבל החזר מלא עבור הפריטים. הצג מדיניות ההחזרים המלאה

פרטי תאימות המוצר

אנא עיין במידע התאימות הספציפי למוצר זה המתואר להלן.

המידע הבא מסופק על ידי קמעונאי צד שלישי עצמאי המוכר מוצר זה.

יצרן:
המידע הבא כולל את פרטי יצירת הקשר של היצרן של המוצר הרלוונטי הנמכר באתר Fruugo.

  • Shenzhen shi zhan huang keji youxian gongsi
  • Zhijie Xu
  • Block 7.8.9, Chaoyang New Village, Minqiang Community, Minzhi Street
  • , Longhua District (Minde Building) 1002
  • Shenzhen
  • CN
  • 518000
  • bolianfnac@163.com
  • 18124639321

האדם האחראי באיחוד האירופי:
המידע הבא כולל את פרטי יצירת הקשר של האדם האחראי באיחוד האירופי. האדם האחראי הוא המפעיל הכלכלי הממונה המבוסס באיחוד האירופי, אשר אחראי לחובות הציות הקשורות למוצר הרלוונטי הנמכר לאיחוד האירופי.

  • Axitera GmbH
  • Axitera GmbH
  • Kreuznacher Str. 30, D-60486 Frankfurt am Main, Hessen, Germany
  • Frankfurt
  • Germany
  • D-60486
  • infonoticeeran@gmail.com
  • (+49) 6934873848