RGB External Adapter M.2 NVME PCI-E to USB3.1 Gen2 Type-C JMS583 10Gbps External SSD Enclosure Case with Cooling Fan with Write Protection Switch for M Key/B M Key 2280/2260/2242/2230 M.2 SSD for Windows/Mac/Linux Feature: 1. 10Gbps high-speed transmiion: Built-in JMS583 master chip, 1GB large files per second, 10Gbps transmiion rate, and the measured read/write speed can reach 992MB/S 2. Write protection function: After the write protection function key is turned on, the data in the hard disk cannot be modified or deleted, and viruses cannot enter. Put the security lock on the data and open the security lock, which can effectively prevent the entry of viruses, and also prevent accidental deletion/formatting, etc., and prevent the invasion of diseases, illegal tampering, and accidental deletion of data 3. Intelligent temperature control&cooling fan: The built-in silent fan has a rotating speed of 8000 RPM, which is highly efficient in heat diipation. Large area air intake allows air flow to be unblocked, and the fan heats up rapidly to cool down. The air can be fully coated and circulated with the development of hot air. The strong air outlet can quickly facilitate cooling, so as to achieve more effective temperature reduction for the hard disk. When the temperature exceeds 30 degrees Celsius, it will be activated intelligently. Multiple heat diipation. High density aluminum alloy shell+cooling fins increase the contact area between the cooling fins and the air, effectively improve the heat diipation effect, and quickly take away heat. Equipped with silicone heat conduction pad for better cooling during high-speed transmiion 4. RGB light effect: Colorful gradual change cycle light, rich and colorful, gorgeous and eye-catching. Yellow, orange, red, green, blue, purple... equipped with two data lines. Type-C to Type-A data cable (10Gbps) is connected to USB computer to facilitate reading large files; Type-C to Type-C data cable connects Type-C mobile phone and notebook, and large games can be played happily 5. Wide compatibility: Compatible with M.2 NVMe/PCle SSDs in M Key/B&M Key, with sizes of 2280, 2260, 2242 and 2230. (Note: SATA channel M.2/NGFF SSD mSATA is not supported), and most operating systems in the world such as for Windows/Mac/Linux are supported Specification: Origin: Mainland China Model Number: SSD Enclosure Heatsink Package: Yes External Interface: USB Product model: C2605 Product material: Aluminum alloy + ABS Product color: Black Built in interface: M.2 M-Key Output interface: USB3.1 Gen2 Type-C Main control scheme: JMS583 (10Gbps) Support hard disk: M.2 NVMe SSD Transmiion rate: USB3.1 GEN2 10Gbps Support system: For Windows/Linux/MAC Data line length: 24cm/9.45in Applicable size: 2.5 inches Product size: 101x14x14mm/3.98x0.55x0.55in Product weight: 280g Installation steps: Step 1: Unscrew the two screws on the side of the hard disk case and pull out the PCB Step 2: Align the card slot and place the hard disk Step 3: Lock the screws on the back to secure the hard disk Step 4: Paste the hard disk with thermal conductive silicon film and heat diipation metal sheet Step 5: Push the PCB back into the aluminum housing and lock the screws Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. 1 X Hard Disk Case 1 X Type-C to Type-A Cable 1 X Type-C to Type-C Cable 1 X Hard Disk Mounting Screw Pack 1 X Card Taking Pin 1 X Thermal Silicone Sheet 1 X Screwdriver 1 X Heat Sink 1 X Storage Bag