Satellite Finder Signal Meter Characteristics:3.5 inch High definition TFT LCD DisplaySupport both AV out and AV inSupport Auto Satellite and PID SearchMeasurement type: strengthquality; bit error rateInput Impedane:75Input Frequency Range: 950~2150MHzInput Level:-65~-25dbmSupports DISEQC 1.0/1.2, 0/22Khz ToneBoth lock light and beep for the indicator of signal3 Operation Modes: Digital TV; Digital Radio; FavoriteEPG for on Screen Channel InformationEasy Graphic Menu InterfaceRS232 port for software upgrades8.4V/3000mAh Li-ioN Battery includedMax operating time: 4 hoursSatellite Receiver Color:BlackSize: 158x95x45Description:Satellite Signal Meter is a kind of simple instrument used for satellite receiving antenna installation and adjustment. It can adjust the direction of the antenna and the feeding location, and as indicators for the project, such as the polarization angle, determine the position of the antenna to achieve the best.The Satlink WS-6906 has a GREEN "LOCK" indicator light to positively ID the satellite you are looking for.This Satlink Satellite Signal Meter is simple and convenient for setting and aligning a satellite dish.Using the parameters of satellite, you can set and align a satellite dish quickly.The Satlink WS6906 Meter can easily and accurately aim your dish plus View the channel while aiming the dish.It includes high capacity Lithium Battery 3000mAh which works for more than 4 hours after it's fully charged.The Signal Strength Meter Detector never needs to be returned for re-calibration due to the unique calibration system built in to the meter. Each time the meter boots up it automatically calibrates for optimum performance so you can align each install with confidence.