Item Type: Cabinet Drawer Installation Clamps Material: Steel Gross Weight: 560g / 19.8oz Color: Black Applicable to: drawer, cabinet woodworking fixture 1Front Drawer Installation Tool: Our utility clamp firmly fixes the front of the drawer in the drawer box when you screw it, it uses the front clamping tool of the tilt drawer to easily and quickly install the drawer or cabinet. 2Double Chucks: Fixing the front of the drawer to the box of the drawer may be a challenge, but these drawer clips are prepared, with their double chucks and adjustable buffers, our drawer front mounting clips make perfect alignment very easy. 3Thin Contour: The thin contour of frame allows you to close the drawer while still wearing the elastic clip, so it is easy to check the alignment between you and the front clip of the adjacent drawer. Once the trimmer is set, you can pass through a pile of drawers in a short time. 4Easy to Use: Fix the front drawer in place, this drawer installation tool has a left and right pair, and only requires slight clamping pressure. 5Perfect Utility Tools: These cabinet clamps for installing cabinets are the perfect hand tools for woodworking or cabinet manufacturers. Our drawer installation clamps will save a lot of time and provide impeccable results for professional installation of drawers or cabinets.Woodworking drawer front mounting clip: our drawer front mounting clip makes the installation of the drawer front panel simple and accurate, and the arrangement is neat. To use the front drawer installation tool rocker, the top of the drawer slide must be installed at least 3/4in from the top of the drawer box. In addition, a 3/16in space is required between the sides of the drawer and the face frame or cabinet side. What does it include? Left and right front drawer clip installation tools: cabinet tools for installing cabinets. Drawer specifications: maximum horizontal thickness of the drawer: 1?1/8in. Maximum front thickness of drawer: 1in. Maximum lateral overlap: 1?3/4 in. Materials: steel and plastic. Required clearance between drawer box and cabinet frame: 3/16in. Liberal space between top of drawer: 3/4in.2 x Drawer Jig