Carbon dioxide is a key indicator of indoor quality, damaging human cognitive ability and happiness. SCD40 is the generation of -type carbon dioxide sensor of Sensirion.SCD40 has high precision and high cost performance. The module leads out the supply and communication pins with a 2.54mm spacing pin interface. On chip temperature and humidity compensation realizes humidity and temperature measurement through built-in temperature and humidity sensor.SCD40 can realize intelligent regulation of indoor ventilation system according to carbon dioxide concentration. Indoor quality helps to maintain a healthy and efficient environment under low carbon dioxide concentration for a period of time.Reference accuracy, specified range 400-2000 ppmSupply voltage range: 2.4 - 5.5 VHigh accuracy: (40 ppm + 5%)Digital I2C interfaceIntegrated temperature and humidity sensorLow operation to Less than 0.4 Ma average @ 5 V, 1 meas/ 5 minutesInterface definition:1. GND: negative input port of supply2. VDD: positive input port of supply3. SCL: I2C clock port4. SDA: I2C data portBoard size: 13.4 x 21.6mmCondition: NewType: Voltage RegulatorModel Number: RS485Application: ComputerUse: Vehicles & Remote Control Toyscolor:As shownMaterial:plasticPackage Contents:1 set x gas sensor moduleOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.