D9 PM2.5 Laser Dust Particle Sensor Module Detects PM Indoor Gas Air Quality Detection for Purifier

‏59.00 ₪
+ ‏17.49 ₪ משלוח

D9 PM2.5 Laser Dust Particle Sensor Module Detects PM Indoor Gas Air Quality Detection for Purifier

  • מותג: Unbranded

D9 PM2.5 Laser Dust Particle Sensor Module Detects PM Indoor Gas Air Quality Detection for Purifier

  • מותג: Unbranded
מחיר מומלץ לצרכן: ‏159.00 ₪
מחיר: ‏59.00 ₪
החיסכון שלכם: ‏100.00 ₪ (62%)
נמכר על ידי:
‏59.00 ₪
+ ‏17.49 ₪ משלוח

במלאי

מדיניות החזרות ל-14 יום

אמצעי תשלום:

תיאור

D9 PM2.5 Laser Dust Particle Sensor Module Detects PM Indoor Gas Air Quality Detection for Purifier

Zero false alarm rate, Real-time responseCorrect dataMinimum distinguishable particle diameter:0.3 micrometerHigh anti-interference performance because of the patent structure of six sides shieldingOptional direction of air inlet and outlet in order to adapt the different design Please note:There is a slight color difference or difference in kind, it does not affect the use, please do not mind, thank you!PIN1: VCC power supply 5VPIN2: GND power groundPIN3: NC NCPIN4: RXD:Serial port receiving pin (3 3V level)PIN5: TXD serial port sending pin (3 3V level)PIN6: RESET is suspended during use. Lowering will cause the module to malfunction.PIN7: NC NCPIN8: PWM PWM pulse width signal output pin (3 3V level)Circuit design should pay attention to1) D9 requires 5V power supply because the fan requires 5V drive. But other data communication and control pins require 3.3V as the high level. Therefore, the main board MCU connected to it for communication should be powered by 3.3V. If the motherboard MCU is powered by 5V, the communication lines (RXD, TXD) and A level conversion chip or circuit should be added to the control line (SET, RESET).2) The serial output only needs to be connected to PIN1, PIN2, PIN5, and other PIN pins do not need to be connected.3) PWM output only needs to be connected to PIN1, PIN2, PIN8, and other PIN pins do not need to be connectedColour:SilverMaterial:Metal Package Contents:1 * Sensor Module Only the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • מזהה Fruugo: 394253598-842704391
  • EAN: 4069171508193

משלוחים והחזרות

שילוח תוך 24 שעות

  • STANDARD: ‏17.49 ₪ - משלוח בין יום ד׳ 31 דצמבר 2025–יום ד׳ 07 ינואר 2026

משלוח מ- סין.

אנו עושים כמיטב יכולתנו להבטיח שהמוצרים שאתם מזמינים יישלחו אליכם במלואם ובהתאם למפרט שלכם. עם זאת, אם תקבלו הזמנה חלקית, או פריטים שונים מאלו שהזמנתם, או שיש סיבה אחרת לכך שאינכם מרוצים מההזמנה, באפשרותכם להחזיר את ההזמנה, או כל אחד מהמוצרים הכלולים בהזמנה, ולקבל החזר מלא עבור הפריטים. הצג מדיניות ההחזרים המלאה

פרטי תאימות המוצר

אנא עיין במידע התאימות הספציפי למוצר זה המתואר להלן.

המידע הבא מסופק על ידי קמעונאי צד שלישי עצמאי המוכר מוצר זה.

יצרן:
המידע הבא כולל את פרטי יצירת הקשר של היצרן של המוצר הרלוונטי הנמכר באתר Fruugo.

  • Zhengzhou Guancheng Hui District Sales Department Store
  • Zhengzhou Guancheng Hui District Sales Department Store
  • No. 418, Unit 2, Building 2, Geological Team Family Courtyard, No. 3 Xinzheng Road
  • Zhengzhou
  • CN
  • 450000
  • ranren01792@163.com
  • 18537367677

האדם האחראי באיחוד האירופי:
המידע הבא כולל את פרטי יצירת הקשר של האדם האחראי באיחוד האירופי. האדם האחראי הוא המפעיל הכלכלי הממונה המבוסס באיחוד האירופי, אשר אחראי לחובות הציות הקשורות למוצר הרלוונטי הנמכר לאיחוד האירופי.

  • EC REP SERVICES SL
  • EC REP SERVICES SL
  • Calle Gran Via 49, 7 Dch
  • Madrid
  • ES
  • 28013
  • ecrepservice@hotmail.com
  • 0034-682797075