Features 1.ADJUSTABLE VOLTAGE CURRENT: Using advanced microprocessor, the buttons can accurately adjust the output voltage and current. The parameter adjustment buttons can be locked to prevent misoperation from disturbing the output voltage and current parameters 2.REAL TIME DISPLAY: Using 4 digit high brightness digital tube, which can display the output voltage, current, capacity and time in real time; Can be set to automatically output after power on, constant voltage and constant current output; full digital display is easy to use 3.RESERVED INTERFACES: Module can communicate with the single chip computer or computer through the reserved port, which is convenient for secondary development. Independent power supply interface is reserved, and the input voltage can be extended to above 100V 4.IMPROVE MODULE PERFORMANCE: Using good quality power devices, combined with the CV and CC loops formed by peripheral accurate op amps, greatly improve the performance of the module 5.GOOD HEAT DISSIPATION: Two 0.8mm double wire wound high current inductors are used, two 470uF/100V electrolytic capacitors are used for the input, and two 1000uF/63V electrolytic capacitors are used for the output, with built in fan for heat dissipation, possess low temperature rise, and very good output voltage quality 6.WITH INDICATORS: The module has working status indicators, which outputs OUT, constant voltage CV, and constant current CC indicators, can check the working status in real time Specification Item Type: Power Supply Module Material: PCB Model: DKP6012 Input Voltage Range: 10V~75V Output Voltage Adjustment Range: 0~60V Output Current Adjustment Range: 0~12A Output Power: 0~720W Output Voltage Setting Resolution: 10mV Output Current Setting Resolution: 10mA Power Supply Effect: CV less than 0.5%+10mV, CC less than 1%+10mA Load Effect: CV less than 0.5%+10mV, CC less than 1%+10mA Output Ripple: < 50mVpp (input 54V, output 12V, current 5A) 100Hz Fluctuation Transmission Ratio: < 1/10000 Typical Efficiency: 94% (input 54V, output 30V, current 5A) Voltage, Current Display Accuracy: 10mV, 10mA Voltage Display Error: ±1%+20mV Current Display Error: ±2%+20mA Response Time: < 50ms Storage Operation: M0~M9 a total of 10 groups of parameter storage Cooling Method: Onboard radiator, air cooling Operating Ambient Temperature: 0~40℃ Storage Ambient Temperature: -20~70℃ Using Environment: Indoor use design, maximum humidity 80% Package List 1 x Power Supply Module