10W Solar Fountain with Water Pump 2M 1000L/H description<br> This product do solar power supply. It consists of a division into a solar panel and a new brushless pump. It is a fast, ready and ready device. Plus, ma no sockets do connect the batteries, so it's not only easy to use but also safe. This product is suitable do bird bath, small pond, garden decoration, water circulation for open, etc.<br> Specification<br> Solar panel: 17V/10W<br> Brushless pump input: DC 6-24V<br> Maximum number of leaks: 1000L/h<br> Maximum stamping height: 2,5 m<br> Solar Panel Size: 35x23,5x1,7 cm/13,78x9,25x0,67 inch<br> Product weight: 1,36 kg<br> Maximum water height: 200 cm<br> Main features<br> The pump starts automatically within 3 seconds when bright sunlight falls directly on the solar panel without any shadow.<br> Method of action<br> 1. Assemble the product according to the sketch.<br> 2. Place the device at the installation site where the solar panel is located, which is not shielded from the sun.<br> 3. In the initial position of the pump do water flowing out of the air. It is better not to connect the do pump if it does not start spraying normally.<br> Package includes<br> 1*Solar water pump<br> 1* Installation Accessories<br> 1*Operating instructions<br> Attention<br> 1. The pump is driven directly by sunlight. It will only work continuously when sunlight is on. Since the power of the solar panel depends on sunlight, the operation of the pump ma the effect of weather, season, place, etc.<br> 2. The pump cannot work without water recently, because it will shorten do its additional.<br> 3. Do not place solar panels and water containers as they can be used.<br> 4. Clean the pump regularly. If you are do disposal, you will stop working.<br> 5 . The solar panel is made of glass and metal. Caution should be exercised when using with it. I do not allow them to be used.