This towel bar for hanging towels put towel or something else Material: stainless steel, solid and practical Bar length: about 35CM Easy to install, details in the photo and Product Size: 3 bars-35cm Description: A new style for hanging napkins in the family. Simpler and more functional; With stainless steel material, you dont worry about the quality. Robust and easy to clean; You can adjust the bars to any angle, ideally it can rotate 360 , after installing in the wall, 180 . Installation: To install this towel bar 1.Loosen the screws at both ends, pull 2 shimmes; 2.Measure the distance of the shimme holes and mark 2 places in the wall (2 holes); 3.Use electric drill to dig 2 holes on the marks and insert the green screw in the hole; 4.Fix shimmes with screws; 5.Tighten screws at both ends of this towel holder. Finished Take care to open the tile wall: 1.Choose a place which is flat and solid solid, avoid the power line, then mark it; 2.Paste transparent gummed paper, against slipping and breaking; 3.Use a cement nail to dig a small hole in the marked place; 4.Holding an electric drill, lightly and slowly dig the hole until the hole is in the tile; 5.Dig the hole quickly, strongly and firmly in the wall, during this procedure it is better to use water to cool it if your tile is expensive. Specifications: Material: steel intox Color: Silver Dimension: approx. 35 * 26 * 3.7cm (L * W * H) Package included: --- Towel bar 3 bars --- Hardware assembly (2 screws, 2 plastic plugs, a tool to release the screws on both ends of the towel rail)