1、FLAMELESS HEAT: Utilizing electromagnetic fields to heat metal, faster, more precise, and highly efficient. With no open flame, this magnetic induction heater ensures safety in operation. 2、3 PIECE COIL: The kit includes three different coil sizes: 1 x 0.79in (20mm), 1 x 0.98in (25mm), and 1 x 1.18in (30mm), catering to various requirements. 3、3MM BRASS COIL: Made with 3.0mm brass core, these coils can withstand prolonged heating up to a high temperature of 800℃, with good power saving effect. 4、LED LIGHT: With an LED light at the end, this induction heater provides lighting in dark working areas, allows for a clearer understanding of the work progress and the status of the heated object. 5、OVERHEAT PROTECTION: With cooling fan and overheat protection, this bolt buster tool safely heats nuts and rusty screws without damaging nearby thermal sensitive components. Item Type: Magnetic Induction Heater Material: Flame retardant ABS, brass Model: FH 1500B Power Saving Effect: Power saving can achieve over 30% Working Frequency: 50-60Hz Rated Power: 1500W Heating Temperature: 800℃ Time Required for Heating at 800℃: 5-30 seconds (the larger the object, the longer the time required) Heating Bolt Diameter: Can be covered by coil, which can be adjusted freely Environmental Temperature: -40℃ to 60℃ Relative Humidity: <95% RH Atmospheric Pressure: 86KPa to 100KPa Function: 1. Equipped with soft start function, long service life in case of frequent starts 2. Equipped with IGBT overcurrent protection function 4. Equipped with IGBT over temperature protection function 5. Equipped with heating coil short circuit protection function 6. Equipped with heating coil open circuit protection function 7. Full bridge series resonant circuit topology with strong anti interference ability 8. Using high performance IGBT driver chip for accurate driving and output waveforms 9. Automatic identification of load and phase locked function to achieve high power factor at the load end, and to enable circuit control to work efficiently in weak inductive areas 10. Several electromagnetic heating controllers can be installed in parallel on the same heating tube without interfering with each other 11. Good power saving effect: Compared with the currently used electric heating coils, the power saving can achieve over 30% 12. Easy installation: Can be connected to induction coils with bucket and flat plate structures, etc. 1 x Magnetic Induction Heater 3 x Heating Coil 2 x Screw 1 x Storage Box 1 x Instruction Manual