10km Electric Fence Charger Intelligent Voltage Regulation High Voltage Pulse Electric Fence Alarm Controller 100‑240V EU Plug Item Type: Electric Fence Charger Material: ABS Size: Approx. 25x15x7cm/9.8x5.9x2.8in Weight: Approx. 1343g/47.4oz Model: MKF 10 Pulse Period: 0.75S-0.3S Output Energy: 4J Pull Wire Length: 10000m Alarm: Yes Use: Animal husbandry protection Applicable Scene: Outdoor Applicable Animals: Pigs, cattle, sheep, horses, dogs and other animals Working Principle of Electronic Fence: Create a psychological barrier for the animals, so that they are afraid to approach the electric fence. The pulse current sent by the electric pulse generator with the earth pole system is transmitted to the fence line at the frequency of once per second. When the animal touches the fence, the animal forms a circuit with the fence and the ground and receives a rapid safety shock. The shock is enough to make the animal unforgettable in memory, thus playing the role of controlling the animal's access and protecting the fence. Since the role of the electric fence is to make the animal create a psychological barrier, the fence does not need to be very strong to play its role. However, when designing and constructing the fence, it should be better designed and constructed so that the pressure from the heavy snow and wind of animals can be absorbed and relieved. The power provided to the fence length should be large enough to play a control role. New Machine Test: 1. Start: 3. Alarm Test: Troubleshooting: 1. It does not work, and all indicators are not on: Check whether the power supply is connected, whether the power supply is normal, or whether the power adapter is damaged. 2. The grounding wire or shell has electric shock: The grounding wire is not used, or the depth of the grounding wire is not enough, or the grounding wire is not grounded properly as required. 3. The power leakage protector trips: The ground wire is not connected properly. Reconnect the ground wire. If the problem is not solved, try to replace a switch with a higher amperage, or contact after sales service. 4. Machine long sound alarm (the leakage light is on for a long time): Unplug the ground wire and live wire of the machine, power on the empty machine. If it is normal, it means that the fence wire is seriously leaking, or the battery power is insufficient. 5. Machine short sound alarm (electric leakage light flashing): If there is electric leakage in the fence line, you can drive the machine to the fence to listen to the sound of fire to find the fault point and repair it. 6. Long sound alarm, pulse light does not flash: The battery is low, or the power adapter is damaged, or the pulse module is damaged, contact after sales service. Machine Description: 2. The battery connection line is used to connect the host when using the battery. 3. The alarm and the fence will emit the alarm sound in case of failure. 7. Leakage indicator light, when this light is on or flashing, it indicates that there is leakage in the fence or the host is faulty. 8. The grounding terminal is grounded through the wire grounding pile. 12. The alarm socket is used to connect the alarm with power less than 10W. If the alarm with power greater than 10W needs to be connected, the external control power supply is required to supply power to the alarm. If the alarm with power greater than 10W is directly connected, the line inside will be burned, and the customer will bear the loss caused by this.