Micrometer Spiral 2550mm Outside Measuring Calipers Mechanical Structure Locking Device

‏239.00 ₪
ומשלוח חינם

Micrometer Spiral 2550mm Outside Measuring Calipers Mechanical Structure Locking Device

  • מותג: Unbranded

Micrometer Spiral 2550mm Outside Measuring Calipers Mechanical Structure Locking Device

  • מותג: Unbranded
מחיר: ‏239.00 ₪
נמכר על ידי:
‏239.00 ₪
ומשלוח חינם

במלאי

אנו מקבלים את אמצעי התשלום הבאים

תיאור

1The measurement exterior is made of carbon steel, which is resistant to wear and deformation, and the measurement is more accurate. 2The measuring range is 2550mm, which is a more precise tool for measuring length than vernier calipers. 3Using laser engraving design, the scale standard reading is clear, and the accuracy of 0.01mm is guaranteed. 4The micrometer has a glossy body and is stable and unimpeded when sliding on the worktable, ensuring stable measurement and improving efficiency. 5The outside micrometer is suitable for measuring small grooves, such as drill bits, vertical milling cutters and other diameters and clock gears. Item Type: Micrometer Range: Approx. 25-50mm / 1-2in Material: Carbon Steel Resolution: 0.01mm Product Error: 0.04mm Scale Technology: Laser scale Measurement Type: Outer diameter measurement How to use:1. For zero calibration, ensure that the front edge of the micrometer cylinder is aligned with the horizontal engraved line, and the main axis scale is aligned with the zero scale of the micrometer cylinder. The first step to correct the degree is to ensure that the zero calibration is correct. 2. When measuring an object, first rotate the ratchet to adjust the distance between the side drill and the side micro screw to be slightly larger than the size of the object, and put the object to be measured into it. 3. Slowly rotate the ratchet until it clicks, and the reading starts. The click indicates that it has been locked, and it is not necessary to rotate it too hard, otherwise it will cause damage. 4. First, read the graduation value of the scale line under the fixed casing with the end surface of the microtube as the guideline, and then use the horizontal line on the fixed casing as the reading guideline to read the graduation value on the movable scale. , The reading should be read to one-tenth of the minimum degree. 1 x Micrometer 1 x Wrench 1 x Gauge Block
  • מזהה Fruugo: 204448078-434629615
  • EAN: 889615208106

משלוחים והחזרות

שילוח תוך 2 ימים

  • STANDARD: חינם - משלוח בין יום ג׳ 28 אוקטובר 2025–יום ב׳ 03 נובמבר 2025 - חינם

משלוח מ- סין.

אנו עושים כמיטב יכולתנו להבטיח שהמוצרים שאתם מזמינים יישלחו אליכם במלואם ובהתאם למפרט שלכם. עם זאת, אם תקבלו הזמנה חלקית, או פריטים שונים מאלו שהזמנתם, או שיש סיבה אחרת לכך שאינכם מרוצים מההזמנה, באפשרותכם להחזיר את ההזמנה, או כל אחד מהמוצרים הכלולים בהזמנה, ולקבל החזר מלא עבור הפריטים. הצג מדיניות ההחזרים המלאה

פרטי תאימות המוצר

אנא עיין במידע התאימות הספציפי למוצר זה המתואר להלן.

המידע הבא מסופק על ידי קמעונאי צד שלישי עצמאי המוכר מוצר זה.

יצרן:
המידע הבא כולל את פרטי יצירת הקשר של היצרן של המוצר הרלוונטי הנמכר באתר Fruugo.

  • Fuzhou Oulibogexiangbao Youxiangongsi
  • Fuzhou Oulibogexiangbao Youxiangongsi
  • Gulouqu beihuanxilu108hao yonghengxincun7zuo 2bdanyuan
  • Fuzhou
  • CN
  • 350001
  • ffzzbg@outlook.com
  • 8618359831991

האדם האחראי באיחוד האירופי:
המידע הבא כולל את פרטי יצירת הקשר של האדם האחראי באיחוד האירופי. האדם האחראי הוא המפעיל הכלכלי הממונה המבוסס באיחוד האירופי, אשר אחראי לחובות הציות הקשורות למוצר הרלוונטי הנמכר לאיחוד האירופי.

  • EC REP SERVICES SL
  • EC REP SERVICES SL
  • C/GRAN VIA 49, 7 DCH
  • MADRID
  • ES
  • 28013
  • ECREPSERVICE@HOTMAIL.COM
  • 34 910563102