Original LCD Screen for Fitbit Sense 2 Digitizer Full Assembly About the product 1. Replacement LCD screen and touch screen digitizer assembly for Fitbit Sense 2 2. Replace your broken or non-functional screen with a new unit 3. Restore your device to a like-new appearance 4. Designed to fit and function properly with compatible devices 5. Each unit is tested and inspected for quality before shipment 6. Professional installation is highly recommended. No responsibility will be accepted after installation Before Installation Notes Tip 1: Test before installation Do not remove any protective films or labels when testing. Be aware of static electricity. Before beginning any repair, ground yourself using an ESD (electrostatic discharge) strap to prevent damage to internal components. Wear eye protection and handle glass components carefully to avoid injury. Tip 2: Perform a test before full installation Screen replacements are delicate. Test the display before final installation. Partially disassemble the device, connect the motherboard to the new LCD/screen assembly and power on to verify functionality. If the test is successful, proceed with full installation. If the screen does not display, contact support immediately. Do not force installation if issues are present. No responsibility will be accepted after the screen is installed. Tip 3: Avoid excessive cable bending Do not bend the LCD cable beyond 90 degrees. Excessive bending may result in display failure or black screen.