Item Type: Electric Motor_x000D_ Bearing Type: Porous bearing_x000D_ Gear Material: Metal_x000D_ Motor Wire Material: Copper wire_x000D_ Spindle Material: Steel_x000D_ Radial Force: 1 kgf_x000D_ Axial Force: 0.7 kgf_x000D_ Spindle Maximum Bearing Capacity: 5 kgf_x000D_ Rated Voltage: DC 12V_x000D_ ModelReduction RatioNo-Load SpeedLoad SpeedLoad TorsionGearbox Size_x000D_ ZGA37RG 550R-12V19_x000D_ 550RPM460RPM0.48Kgf/cmApprox. 37 x 29.5mm / 1.5 x 1.2in_x000D_ ZGA37RG 110R-12V131.6110RPM90RPM1.2Kgf/cmApprox. 37 x 24.5mm / 1.5 x 1in_x000D_ ZGA37RG 12R-12V140112RPM11RPM10Kgf/cmApprox. 37 x 30.5mm / 1.5 x 1.2in_x000D_ ZGA37RG 29R-12V117229RPM24RPM6Kgf/cmApprox. 37 x 29.5mm / 1.5 x 1.2in_x000D_ _x000D_ Output Shaft Size (D x L): Approx. 6 x 14mm / 0.2 x 0.6in(manual measurement error 1mm)_x000D_ Motor Size (D x L): Approx. 36 x 33.3mm / 1.4 x 1.3in(manual measurement error 1mm)_x000D_ Mounting Hole Size: M3_x000D_ Application: Automatic vending equipment, panning cameras, slot machines, currency detectors, coin return equipment, automatic doors, peritoneal machines, toy motors, etc. 1The motor adopts all?metal gear with strong load?bearing capacity and effectively protects the gear box motor body. 2The gear bearing is a micro?reduction type, which can reduce the speed of the motor, and can run with low noise and high torsion. 3The motor wire is made of pure copper, with good conductivity, and the power of the geared motor is instantly increased by 30%. 4Spindle is made of steel, which has good toughness and impact resistance, which can increase the service life of bearing and gear motor. 5Widely used in automatic vending equipment, currency detectors, coin return equipment, automatic doors, toy motors, etc.1. Use Tolerance: Pay attention to the use of voltage and current range, otherwise the performance and life of the motor will be reduced._x000D_ 2. Transport the Motor: Gently, try to use a part of the motor housing._x000D_ 3. Motor Wiring: Red leads to the positive pole, black leads to the negative pole, if the connection is reversed, the motor rotates in the reverse direction._x000D_ 4. Overload: As far as possible within the specified load range, it is forbidden to run the motor for too long in a locked?rotor or close to stall state. Otherwise, the motor will burn out._x000D_ 5. Motor Storage:_x000D_ Storage Temperature: 0?40_x000D_ Storage Humidity: 15%?90%RH_x000D_ Avoid placing it in high temperature, high humidity and corrosive gas._x000D_ 6. Motor Operating Temperature: 0?701 x Motor