Feature:1. REASONABLE DESIGN: This vector network analyzer is licensed under the LGPL and is based on the design for OwOComm for measuring higher frequency.2. UNIQUE USER INTERFACE: The initial calibration data is not loaded at startup, and the calibration data will not be automatically inserted after the user changes the frequency.3. DATA CALIBRATION: Every time you start the network analyzer and change the frequency, you must calibrate the data again or recall the calibration data.4. WIDE APPLICATION: The network analyzer has a frequency range of 50kHz-3GHz and a scan speed of 100 points/second, has a wide range of applications.5. EASY OPERATION: The analyzer kit is suitable for shortwave HF VHF UHF antenna, equipped with USB data cable, easy to connect and good stability.Specification:Item Type: Vector Network AnalyzerFrequency Range: 50kHz-3GHzSystem Dynamic Range (Calibrated): 70dB (up to 1.5GHz), 60dB (up to 3GHz)S11 Background Noise (Calibrated): -50dB (up to 1.5GHz), -40dB (up to 3GHz)Scanning Speed: 100 points/secondDisplay: 2.8in, 320 x 240USB Interface: Micro USBPower Supply: USB, maximum charging current 1ABattery: Li ion battery 1950mAh (built in battery)Maximum Scan Point (On Device Screen): 201Maximum Scan Point (USB): 1024Port 2 Return Loss (1.5GHz): 20dB TypicalPort 2 Return Loss (3GHz): 13dB MinimumVNA-QT Software Compatible Systems: Planned for Linux, for Windows (7+), for iOS.Package List:1 x Analyzer Host1 x USB Data Cable2 x SMA Male to Male RG316 RF Cable 15cm1 x SMA Female to Female Connector1 x SMA Simple Calibration Kit LOAD1 x SMA Simple Calibration Kit SHORT1 x SMA Simple Calibration Kit OPEN1 Set DIY Accessories1 x User ManuaNote:Please read the instruction manual carefully before use to avoid damage to the device.