Numerical Control System Stepper Motor Controller CNC Metalworking Equipment 32 Bit CPU(Single Axis )

‏499.00 ₪
ומשלוח חינם

Numerical Control System Stepper Motor Controller CNC Metalworking Equipment 32 Bit CPU(Single Axis )

  • מותג: Unbranded

Numerical Control System Stepper Motor Controller CNC Metalworking Equipment 32 Bit CPU(Single Axis )

  • מותג: Unbranded
מחיר מומלץ לצרכן: ‏1,099.00 ₪
מחיר: ‏499.00 ₪
החיסכון שלכם: ‏600.00 ₪ (54%)
נמכר על ידי:
‏499.00 ₪
ומשלוח חינם

במלאי

אנו מקבלים את אמצעי התשלום הבאים

תיאור

Item Type: CNC lathe controllerModel: CM35L-10System Composition:Control System Mainly Composed of Following Parts:High-performance, high-speed 32-bit CPULCD monitor (Resolution: 192 x 64)Special motion control chip (Signal Output: 5V pulse + direction)Input / output (14 photoelectric isolation 24V input, 8 photoelectric isolation 24V output, single channel rated 500mA)Maximum Program Line: 480 linesContact key array (28 keys)System Indicators:Minimum Data Unit: 0.001mmMaximum Data Size: 99999.999mmFast Motion speed Limit: 9000mm / min (when pulse equivalent is 0.001mm)Maximum Processing speed Limit: 9000mm / min (when pulse equivalent is 0.001mm)Maximum Pulse Output Frequency: 150KHzControl Shaft Number: 1-4 axis (X, Y, Z, C)Linked Shafts Number: X, Y, Z, C axis can be linearly interpolated, X, Y can be circularly interpolatedElectronic Gear: Numerator: 1-99999, Denominator: 1-99999System Main Functions: Automatic, manual, program, parameter, self-check, setting, etc.Optional Style: Single-axis / Biaxial / Tri- axis / 4-axis (optional)Package List1 x Controller1 Pack x Accessory1Supports automatic operation including dry running and single-step running, CNC lathe controller 's manual operation including motor CW /CCW, back to program 0, back to mechanical 0 and output control. 2Direct output terminal interface on the back reduces the transfer board, the terminals on the back can be directly wired, clear and convenient, which saves costs 3Isolated IO port means that with input and output ports isolated from the system, the output port capacity can be up to 1A 4You can directly use the USB cable to power the system, which is convenient for the transmission of the boot screen and the program, learning and operation 5With 20 control commands, external manual supports control motor CW /CCW, start, pause, alarm, emergency stop, etc. 6CNC lathe controller's parameters include system parameters, system self-test, IO settings, user and manufacturer password management, etc. And it also supports program editing, reading, deleting and saving. 7Newly developed motion controller uses a high-performance 32-bit CPU, the driving equipment uses a subdivided stepper motor or servo motor, equipped with a liquid crystal display, a completely enclosed touch operation keyboard, while the system has high reliability, high precision, low noise and simple operation.
  • מזהה Fruugo: 346199499-757267924
  • EAN: 686237098289

מידע על בטיחות המוצר

אנא עיין במידע בטיחות המוצר הספציפי למוצר זה המתואר להלן

המידע הבא מסופק על ידי קמעונאי צד שלישי עצמאי המוכר מוצר זה.

תוויות בטיחות למוצר

CE Mark
אזהרות בטיחות:
  • Not suitable for children under 36 months
  • Choking Hazard
  • Adult supervision recommended

משלוחים והחזרות

שילוח תוך 2 ימים

  • STANDARD: חינם - משלוח בין יום ב׳ 06 אוקטובר 2025–יום ג׳ 14 אוקטובר 2025 - חינם

משלוח מ- סין.

אנו עושים כמיטב יכולתנו להבטיח שהמוצרים שאתם מזמינים יישלחו אליכם במלואם ובהתאם למפרט שלכם. עם זאת, אם תקבלו הזמנה חלקית, או פריטים שונים מאלו שהזמנתם, או שיש סיבה אחרת לכך שאינכם מרוצים מההזמנה, באפשרותכם להחזיר את ההזמנה, או כל אחד מהמוצרים הכלולים בהזמנה, ולקבל החזר מלא עבור הפריטים. הצג מדיניות ההחזרים המלאה

פרטי תאימות המוצר

אנא עיין במידע התאימות הספציפי למוצר זה המתואר להלן.

המידע הבא מסופק על ידי קמעונאי צד שלישי עצמאי המוכר מוצר זה.

יצרן:
המידע הבא כולל את פרטי יצירת הקשר של היצרן של המוצר הרלוונטי הנמכר באתר Fruugo.

  • Jinan Tongxuan Cross-border E-commerce Co., Ltd.
  • Jinan Tongxuan Cross-border E-commerce Co., Ltd.
  • No.9-20, Building B, City of Light
  • Huaiyin District, Jinan
  • China
  • Jinan
  • CN
  • 250000
  • jntongxuan02@163.com
  • 13380966881

האדם האחראי באיחוד האירופי:
המידע הבא כולל את פרטי יצירת הקשר של האדם האחראי באיחוד האירופי. האדם האחראי הוא המפעיל הכלכלי הממונה המבוסס באיחוד האירופי, אשר אחראי לחובות הציות הקשורות למוצר הרלוונטי הנמכר לאיחוד האירופי.

  • WongBo
  • NG HOT SARL
  • 99 bis avenue du Général Leclerc
  • 99 bis avenue du Général Leclerc
  • France
  • Paris
  • FR
  • 75014
  • ngnghot@outlook.com
  • 33695000695
  • https://www.captaincontrat.com/creer-son-entreprise/sarl/capital-social-de-sarl-montant-minimum-constitution-modification...tout-savoir