illustrate: 1. Torque wrench It is only used to tighten screws, bolts or nuts to the required torque. 2. When the wrench reaches the preset torque value, the head of the wrench will tilt slightly accompanied by a 'click' sound or feel the feedback force of releasing the torque. At this time, the force should be stopped (do not misunderstand it as slipping). 3. Do not use it as a crowbar or replace a general ratchet wrench, and do not use it as a hammer 4. Do not exceed the maximum value of the wrench when using it, only apply force on the handle and do not attach any post to the product to extend it. 5. The torque value of the wrench must be adjusted to be the same as the required torque value. If the torque value you adjust is too or too small, it will seriously damage the wrench twisting equipment. Notice: The torque wrench is mainly used for tightening, and it should not be used to disassemble the bolts and nuts to avoid damage. Material: Metal colour: As shown Package Contents: 1 x Torque wrench Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.