Features: 1.The camera is made of high?definition chipset, with clear and colorful image display. 2.IP68 level waterproof, it can also show excellent functions even in heavy rain days. 3.170?degree wide viewing angle, provides wider and clearer vision, making it safer to reverse. 4.With automatic backlight compensation, the night vision is clear and bright, and supports NTSC TV system. 5.Solving the problem of car poor rear view effect, can help parking and reduce accidents. 6.Easy to install, no complicated tools required, convenient to use. Specification: Condition: 100% Brand New Item Type: Rear View Camera Material: ABS + Glass Color: As picture shown Image Sensor: Color 1/3in Sensor CCD Lens Material: 100% Glass Effective Pixels: 756(H)720(V) Pixel Horizontal Resolution: 480TV Lines Auto White Balance Automatic Backlight Compensation Field of View: 170 Degrees Night Vision: Support Tv System: NTSC Video Output: CVBS RCA Connector (1.0VP-P, 70OHM) Minimum Illumination: 0.01 Lux / F = 1.2 (0 Lux and IR) Voltage: DC12V Power Consumption: 120mA Working Temperature: -20C-75C, Relative Humidity Maximum 95% Storage Temperature: -40C-80C, Relative Humidity Maximum 95% Waterproof Rating: IP68 Video Cable Length: Approx. 6m/19.7ft Power Cord Length: Approx. 1.5m/4.9ft Fitment: Fit for Cadillac ATS 2013-2018 Mounting: 1. Take out your stock license plate light at the back of your car. 2. Fix the camera to where the stock license plate light was. 3. Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power 4. Connect the power of the camera to your car reverse lights - red wire to positive and black wire to negative. 5. Connect the video cable of the camera to the extension cord. 6. Connect the extension cord to your car monitor. 7. You will see the images when your car is in reverse shift. PackageList: 1 x Rear View Camera1 x Power Cord1 x Video Cable1 x Manual