["Description:\nbrand new and high quality\nFeatures:\nThis is a HF QRP SSB/CW transceiver.\nfor Smart husd transceiver, 10/15/17/20/30/40/60/80m frequency bands 8-sdr radio transmitter receiver.\nThe ultra-small size is easy to carry for outdoor use, and it adopts 1602N LCD screen.\nSupport to connect to PC and use FT8, JS8, FT4 and other digital mode software control, support CW automatic decoding.\nThe transceiver kit contains a large number of functions defined by the firmware in the microcontroller chip.\n\nSpecification: \nInteraction and display: rotary encoder; menu + exit for key; 1602N liquid crystal display\nHeadphone output interface (marked with headphones)\nPTT_Out interface (marked with PTT OUT)\nMic microphone and button interface and PTT (marked mic/PTT(for key))\nHandheld speaker/microphone/PTT combination (Baofeng UV-3R, marked with-SPK/MIC)\nThe antenna interface is a BNC interface (with BNC-SL16)\nThe power interface is 5.5x2.1 (or 5.5x2.5)\nMaterial: Aluminum\nPlug: 2 Types Optional(please refer to pictures)\nWorking vWoltage: 9-13.8V (maximum 15V, but not recommended, the transmission power will drop below 13.8V)\nMode Support: USB, LSB, CW, AM, FM\nDSP Filter: 4000, 2500, 1700, 500, 200, 100, 50Hz passband\nReceiver Noise Floor MDS: -135dBm at 28MHz (in 200Hz BW)\nBlocking Dynamic Range: 20kHz offset 123dB, 2kHz offset 78dB\nfor Shell Size: Approx.100x88x38 mm/3.9x3.5x1.5 inch\n\nNotes:\nPlease allow 0-1cm error due to manual measurement. pls make sure you do not mind before you order.\nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Includes: \n1x Transceiver\n1x Microphone\n1x for DC Adapter\n1x BNC-SL16\n3x Wrenches\n1x Wipe Cloth"]