Features The product has stable and reliable performance and long service life. 120W, strong output power, the maximum stroke is 130m. The product is compact and easy to install. The theoretical value of the pump flow can reach 10 l/m. Products are widely used in: pressure washers, water sprayers, pesticide sprayers, garden irrigation equipment, filling machines and other equipment. Specification: Maximum power: 120W Maximum pressure: 13 kg Working pressure: 8G Orifice flow: 10 l/m Vertical suction: 1.5 m Elevator: 130 m Package list: 1 * Pump 1 * Filter Net 1 * Pump Handle 3 * Installation Screw 1 * spare fuses Note: 1. The actual product color may differ from the photo due to the lighting. 2. There may be a slight error in the measurement of the product.3. Please note that this product has no faucet control function. 4. If the product is connected to a water tap, ensure that the water tap is turned on. If the faucet is not turned on, the pump is dry and burned out. Instruction manual: 1. Connect the pump to the inlet and outlet pipes. It must be ensured that the connection between the inlet and outlet pipes and the pump is tight, otherwise there will be negative pressure or water leaks. (Note: There are arrows on the pump cover to indicate the direction of water inlet and outlet, and the direction of the arrow indicates the direction of water outlet.) 2. Install the filter on the inlet end. The filter density is preferably over 80 mesh. (ie 80 holes per square centimetre) 3. Connect the micro diaphragm pump to the motor. The electrical parameters of the connected power supply must correspond to the input requirements of the motor. 4. Turn on the power and the motor pump will start running. 5. The water is drained for 5 to 10 seconds. Deflate the pump and piping. When the water is stable, turn off the power temporarily and connect the water gun or pump head. Package List