1Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output. 2Self-powered, no external power supply required. 3Measured current AC 0-100/150/200A, output signal DC 0-10V. 4Straight-through structure design, isolation withstand voltage up to 2000V. 5Hysteresis is less than 1% and can be used under strong magnetic conditions. Features: 1.Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output.2.Self-powered, no external power supply required.3.Measured current AC 0-100/150/200A, output signal DC 0-10V.4.Straight-through structure design, isolation withstand voltage up to 2000V.5.Hysteresis is less than 1% and can be used under strong magnetic conditions.6.The outer casing is made of self-extinguishing material ABS.7.Suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system and so on.Specification:Model: SZT20-CH-10VSupply power: Not requiredOutput type: 0-10V DCInput straight-through current: AC 0-100/150/200ASwitch on minimum: 0.50.2AMaximum overload of straight-through current: 200% Accuracy: 1%Power consumption: 1WLeakage current: 1mAHysteresis: 1%Linearity: 10%-100%Straight-through wire diameter: 0.35-20mmResponse time: 200msWithstand voltage: 2000VAC 50/60Hz 1minWorking environment: -20~60, 5-95%RHDimensions: 61.5*90*26mm / 2.4*3.5*1.0inHole diameter: 20mm / 0.8inPackage weight: Approx. 109g/3.8ozPackage list:1 * AC Current TransmitterNote: 1.Due to the difference between monitors and light effects, the pictures may not reflect the actual color of the item.Please allow slight error due to manual measurement. Thanks for your