1. The battery adapter/connector has been tested and can be used with DeWALT 60volt flexvolt batteries. Including models: DCB606 and DCB118X1 adapters have 150 mm 12 gauge line installed2. The battery adapter/connector is equipped with fixing screw holes for easy fixing with screws.specification:Model: AdapterWire: PTFE 1332 12AWGOutgoing wire length: 150mmSize: 11 x 8.5 x 5.5cmPrecautions:1. This is not a charger, it only outputs battery voltage and power directly from the battery.2. When connected to Dewei batteries, this adapter is only wired to 60V output, not 20V output.3. Do not use this adapter to charge the battery. Do not short-circuit the battery or disconnect the battery before continuously consuming more than 20 amperes of current to reach 37.5 volts (to extend battery life). Do not charge with 100% power for a long time. It is recommended to store the battery at 70% power (to extend battery life)4. There is only 1 battery adapter, no batteryPlease confirm the relevant models and parameters when purchasing to avoid errors.Colour: blackMaterial: ABSPackage Contents:1 x Battery AdapterOnly the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.