1. Complies with J1772 standard 2. Sleek design with protective cover, supports front installation 3. Pin head features safety insulation to prevent accidental contact; protection level reaches IP54 4. Type: European to American adapter 5. Use: Charging Mechanical behavior: 1. Mechanical life: 10,000 cycles of no-load plugging and unplugging 2. Insertion force during coupling: 45N to less than 80N Electrical performance: 1. Rated working current: 16A or 32A 2. Working voltage: 110V~250V 3. Insulation resistance: 1000MΩ (DC500V) 4. Terminal temperature rise: Less than 50K 5. Withstand voltage: 2000V 6. Contact resistance: Maximum 0.5mΩ Temperature: 1. Working environment temperature: -30°C to +50°C We recommend using the following steps: 1. Plug the Type 2 end of the adapter into the charging cable 2. Plug the Type 1 end of the adapter into the vehicle’s charging socket 3. After the adapter clicks into place, proceed with charging Do not forget to activate the charging station When finished charging, disconnect the vehicle side first, then the charging station side. Remove the adapter from the charging station when not in use. Material: Thermoplastic Color: Black Package Contents: 1 x Electric Charging Adapter Note: Light and display differences may cause slight variations in color compared to the actual item. Measurement allows an error of +/- 1-3cm.